1. Support
  2. Printers
  3. Lexmark M5170
  4. Interactive user guide
  5. Troubleshooting a 126.01 service LVPS error
Lexmark M5170

Lexmark M5170

Printer features: Laser, print only, black & white

Lexmark M5170 Support

Error codes
32.59 or 33.13 Error message
General troubleshooting guide for 900.00 error code system software errors
121.xx Service fuser error
959.20 service error appears when updating the DLE RIP firmware
31.60 Imaging unit Smart Chip error
Troubleshooting a 121.24 fuser error code
Forms and Barcode Card (FMBC) 900.02 error when printing every second page
32.xx Replace Unsupported Fuser Error
Troubleshooting a 111.21 service printhead error
A 'Re-install Missing or Unresponsive Fuser [31.80] Error' Appears
31.46, 31.66 errors and 201.22 paper jam
10.01 or 10.02 Intervention Messages for Vinyl Label Printing
Troubleshooting a 126.01 service LVPS error
980.11 service error posts when the device goes into sleep mode
Troubleshooting a 121.08 error code
121.32 fuser errors in cold environments
Lexmark MS and MX 31x, 41x, 51x, 61x Series ? 121.32 Fuser Errors in Cold Environments
33.xy Non-Lexmark Supply or Part Installed in the Printer
32.49 Unsupported Cartridge error after a firmware update
900 error message and scanner is heating up
Knowledge base
Error codes and messages
Error codes

Troubleshooting a 126.01 service LVPS error

Does an 126.01 Service error appear on your printer? Check out the following steps to troubleshoot the problem.

Issue description

The printer posts a
126.01 Service LVPS
(Low voltage power supply) error.

Solution

Before performing the steps below, confirm the following first:
  • The printer must be running with the latest firmware version. Guide the customer with the updating process if necessary.
  • The power outlet is providing at least
    90%
     of the nominal voltage; i.e., a 120 V outlet must be greater than (
    >
    ) 108V.
Follow the steps below to resolve this issue:
  1. Make sure that printer is plugged directly into the wall outlet. Do not use a
    power strip
    ,
    surge protectors
    or an
    uninterruptible power supply
    .
  2. Make sure that printer has been turned on in an ambient temperature for about 30 minutes.
  3. Update the printer’s firmware with the latest version. Follow steps outline in Downloading the latest Lexmark printer firmware to know how to check, download and update the printer firmware.
If the issue persists, search for more information related to this issue or contact support for further assistance.
LEGACY ID:
TE556

This site uses cookies for various purposes including enhancing your experience, analytics, and ads. By continuing to browse this site or by clicking "Accept and close", you agree to our use of cookies. For more information, read our Cookies page.