1. Support
  2. Printers
  3. Lexmark MS810de
  4. Interactive user guide
  5. TCP/IP installation of a downloaded Lexmark driver in Windows 10 via add printer wizard
Lexmark MS810de

Lexmark MS810de

Printer features: Laser, print only, black & white

Lexmark MS810de Support

Windows
An `Undefined? Icon Label Displays Instead of Travel&Expense
LPM Scan to Network ? Incorrect Permissions Set on Windows Server 2012 Destination Folder
Printer crashes when firmware is updated through the front USB port
Printer clicks off and on and does not stay in sleep mode
How to Determine the Version and Computer Information of Windows 8 and Windows 10
Using the Microsoft Windows 8.1 and Windows 10 Print Management Snap-In Tool
Installing the printer driver using the software CD in Windows 10
TCP/IP installation of a downloaded Lexmark driver in Windows 10 via add printer wizard
Installing the push-pull driver in Windows 10
Installing print queue-based driver in Windows 10
Installing a print driver using a script in Windows 10
Installing WSD using the printer driver in Windows 10
Installing print drivers on Windows 10
Printing from Windows 10
Accessing the print queue in Windows 10
Preventing TCP/IP to WSD Port Conversion after upgrading to Windows 10
Invalid font error prints when printing jobs with TrueType fonts on Windows 10
Auto‑configuration and ask printer settings will not work over USB connection
Using and creating overlays
Creating and exporting a Spool File from AS/400 to a Windows PC
Setting up Universal Print for Windows
Knowledge base
Operating System
Windows

TCP/IP installation of a downloaded Lexmark driver in Windows 10 via add printer wizard

Video: TCP/IP Installation of a Downloaded Lexmark Driver in Windows 10 via Add Printer Wizard

About this video

This video is provided for example purposes
only
. It is intended to familiarize users with the
installation of a Universal Print Driver (UPD) PCL XL
 downloaded from the Lexmark support website.
If Windows 10 print driver is
not
 yet available, you can use
Windows 8
 or
8.1
 driver packages for Windows 10 supported devices.
The following sequence of procedures you must perform are summarized in the video linked above.
  1. Right-click on the driver package, select
    Open
    .
  2. Observe extraction of files to temporary folder.
  3. Accept License Agreement.
  4. Select
    Extract
    , this time to a specified folder; i.e.,
    C:\Lexmark\...
    .
  5. Click
    Start
    .
  6. Select
    Add a printer using a
    TCP/IP address or hostname
    .
  7. Select
    Device type: TCP/IP Device
    .
  8. Enter the
    IP Address
     of the device.
  9. Select or highlight the print driver, i.e., Lexmark Universal v2 XL.
  10. Click
    Next
    .
  11. Complete the installation.
  12. Verify successful installation via
    Control Panel
     >
    Devices and Printers
    .
LEGACY ID:
HO3974

This site uses cookies for various purposes including enhancing your experience, analytics, and ads. By continuing to browse this site or by clicking "Accept and close", you agree to our use of cookies. For more information, read our Cookies page.