Step
| Action
|
1
| Power the printer ON. Click the link to see the GUID-15283c4c-2713-4be8-acc6-be47475e7201-en.dita#location-of-the-power-switch_location-of-the-power-switch. |
2
| Once the printer has fully booted, open the Op Panel Cover to access its second layer. |
3
| Make sure paper is loaded on its tractor. Press the “ Set Up ” button to enter Set up mode . The printer should print the Set Up Page . |
4
| Navigate through the menus. Under “ Control Options ” you’ll see “OFF Mode ”, enter it. |
5
| Once you’re in “ OFF Mode ” menu, you will see that default timeout is 2 hours . Here you can change the desired timeout or disable the feature. |
6
| Navigate back through the menus until you see “ Return to Main Menu ” and select it. |
7
| Select “ Exit and Save Set Up ” to save the desired changes made.
NOTE: For network models (e.g., 2580n+ , 2581n+ , 2590n+ , 2591n+ ), the “Control Options ” is not available on the Embedded Web Server (EWS ). Therefore, changes will have to be made on the printer itself. |