Lexmark Forms Printer 2591+

Lexmark Forms Printer 2591+

Printer features: Dot matrix

Lexmark Forms Printer 2591+ Support

Setup, installation, and configuration issues
How to set up OAuth 2.0
Restoring the 25XX Series Dot Matrix printers to the factory defaults
Configuring the 802.1X/EAP authentication on Lexmark wireless devices
What is IPSec and how to configure this data encryption feature
How to configure the network ready Lexmark 2581 or 2591 series Forms (Dot Matrix) printer in an AS/OS400 environment
How to Locate the Serial Number on a Lexmark 24xx/25xx/25xx+ Series Forms (Dot Matrix) Printer
Lexmark 25xx+ Forms (Dot Matrix) Printer ? How to Adjust the Power Saver Timeout
Lexmark 25xx+ Forms (Dot Matrix) Printer - How to Lock and Unlock the Operator Panel Buttons
How to perform network NVRAM reset
Lexmark 25xx+ Forms (Dot Matrix) Printer ? How to Properly Install the Ribbon Cartridge and Carrier Unit
How to Print a Continuous Hardware Test Page on a Lexmark Forms Printer 23XX, 24XX, and 25XX
Loading continuous paper and forms using the push tractor feed
Lexmark Forms Printer 258x or 259x Reinitializes when Connected Over the Network
How to set/change the 'Tear Off' position
Lexmark SNMP MIB and OID Values Explained (May 2019)
How to enable postscript print error information
Downloading fonts from a PCL 5 or PCL XL driver
Location of the power switch
Exporting and importing user-defined configuration settings
Capturing the Device Description (DEVD) and Output Queue (OUTQ) settings in AS/400
capturing-the-lpma-printer-discovery-tool-logs-ho4
Performing a network trace
How to use the Service Restore Tool to retrieve previously deployed licenses
Obtaining the Menu Settings page (MSP)
How to Copy/Upgrade the Printer Base Code via USB Cable
How to Copy/Upgrade the Printer Base Code via Parallel Cable
Capturing a spool or job file in Linux
Capturing a spool or job file in Macintosh OS
changing-the-geographic-region-setting-ho2599
How to change Date and Time & NTP server
Knowledge base
Setup, installation, and configuration issues

How to perform network NVRAM reset

How to Perform Network NVRAM Reset on Lexmark 2580n+, 2581n+, 2590n+, and 2591n+ Forms (Dot Matrix) Printers
Overview
This document outlines the steps to reset the
NVRAM
of a network-capable Lexmark
25xxn+
 Forms (Dot Matrix) printers.
NOTES:
  • NVRAM
    reset is usually performed to refresh the printer’s network configuration.
  • The suffix “
    n
    ” on the model number indicates that the printer is network capable.
Procedure
Step
Action
1
Turn the printer OFF by pressing and holding the
START/STOP
button until the POWER LED turns orange/amber.
2
Move the
printhead
all the way to the left or to the home position.
3
Using a blunt-pointed object (a ballpoint pen cover, for example), gently press and hold the button located in a small opening just above the printer's
Ethernet port
. Click here to see its location.
4
Turn ON the printer by tapping
START/STOP
 button once while still pressing and holding the network button.
5
Release the network button once printhead initializes or after the printhead moves back and forth from the home position.
If the issue persists, search for more information related to this issue or contact support for further assistance.
LEGACY ID:
HO3826

This site uses cookies for various purposes including enhancing your experience, analytics, and ads. By continuing to browse this site or by clicking "Accept and close", you agree to our use of cookies. For more information, read our Cookies page.