Lexmark Forms Printer 2581n+

Lexmark Forms Printer 2581n+

Printer features: Dot matrix

Lexmark Forms Printer 2581n+ Support

Firmware
900.xx primary escalation requirements
900.xx ‑ boot up failure additional escalation requirements
900.xx error related to DLE additional escalation requirements
900.xx related to printing additional escalation requirements
976.xx primary information requirements
Knowledge base
Escalation checklist
Firmware requirements
Firmware

976.xx primary information requirements

This article shows the primary information required to escalate 976.xx errors.
The log collection varies per
model
 and
printer firmware code
.
If the device is included in the supported printers found in this article, gather the following logs:
  • Logs Gzip (see the aforementioned article for more details on how to capture this file.)
Gather the primary requirement for 976.xx error issues.
Requirement and relevance
How to obtain
Menu settings page
 
This document contains all the printer settings and running firmware code.
On the printer, press
Menu
 >
Reports
 >
Menu Settings Page
Network Setup page
 
This document contains the network settings of the device.
On the printer, press
Menu
 >
Reports
 >
Network Setup Page
.
History information log
This applies to all network‑connected MFPs.
 
This document contains the history information of the device.
  1. Open the printer web interface.
    To do this, perform the following steps:
    1. Open a web browser; for example, Internet Explorer, Mozilla Firefox, Google Chrome.
    2. Enter the printer
      IP address
       followed by
      /se
      ; for example,
      http://192.168.1.2/se
    3. Press
      Enter
      .
  2. Select
    History Information
    .
  3. Save
     the file.
LEGACY ID:
FA1010

This site uses cookies for various purposes including enhancing your experience, analytics, and ads. By continuing to browse this site or by clicking "Accept and close", you agree to our use of cookies. For more information, read our Cookies page.