Setting up your printer

Installing the 250- or 550-sheet-tray

Installing the optional lockable 550-sheet tray

Installing the 2100-sheet tray

Installing the 4‑bin mailbox

Installing the high‑capacity output expander

Installing the staple finisher

Installing the staple, hole-punch finisher

Installing the intelligent storage drive

Installing a hard disk drive or solid-state drive

Installing the hot roll fuser wiper

Loading the 250-sheet or 550-sheet tray

Loading the 2100-sheet tray

Loading the multipurpose feeder

Printing using Xerox® Easy Assist

Printing using AirPrint

Replacing the hot roll fuser

Replacing the hot roll fuser wiper

Replacing the transfer roller

Replacing the MPF pick roller

Replacing the 250- or 550-sheet tray separator pad and pick roller

Replacing the 2100-sheet pick roller and separator pad

Replacing the 250/550 tray insert

Replacing the 2100-sheet tray insert

Replacing the toner cartridge

Replacing the staple cartridge

Replacing the imaging unit

Cleaning the pick roller in the multipurpose feeder

Stapling using the control panel

Stapling using a Windows computer

Stapling using AirPrint

Stapling using XPSE

Hole punching using the control panel

Hole punching using a Windows computer

Hole punching using AirPrint

Hole punching using XPSE

Offset stacking using the control panel

Offset stacking using a Windows computer