Setting up your printer

Installing the 250- or 550-sheet-tray

Installing the optional lockable 550-sheet tray

Installing the 2100-sheet tray

Installing the 4‑bin mailbox

Installing the high‑capacity output expander

Installing the staple finisher

Installing the staple, hole-punch finisher

Installing the intelligent storage drive

Installing a hard disk drive or solid-state drive

Installing the hot roll fuser wiper

Loading the 250-sheet or 550-sheet tray

Loading the 2100-sheet tray

Loading the multipurpose feeder

Printing using Xerox® Easy Assist

Printing using AirPrint

Replacing the hot roll fuser

Replacing the hot roll fuser wiper

Replacing the transfer roller

Replacing the MPF pick roller

Replacing the 250- or 550-sheet tray separator pad and pick roller

Replacing the 2100-sheet pick roller and separator pad

Replacing the 250/550 tray insert

Replacing the 2100-sheet tray insert

Replacing the toner cartridge

Replacing the staple cartridge

Replacing the imaging unit

Cleaning the pick roller in the multipurpose feeder

Paper jam in standard tray

Paper jam in the front door

Paper jam in door B

Paper jam in the output expander or high‑capacity output expander

Paper jam in the 4‑bin mailbox

Paper jam in the duplex unit

Paper jam in the staple finisher

Paper jam in the staple, hole punch finisher

Stapling using the control panel

Stapling using a Windows computer

Stapling using AirPrint

Stapling using XPSE

Offset stacking using the control panel

Offset stacking using a Windows computer