The printer configuration option, found under

Printer Properties

>

Configuration

tab, is

unchecked

when the computer wakes up from

hibernation

or

sleep mode

.

See supported printers list found on the Universal Print Driver page.

Disable Simple Network Management Protocol (

SNMP

) in the TCP/IP port monitor property. To do so:

Step	Action
1	Go to Start > Devices and Printers or Printers , right-click on the printer object, and then select Printer properties .
2	Click on the Ports tab.
3	Click Configure Port...
4	Uncheck the SNMP Status Enabled .

If you need additional assistance, please close this window, go to your product's support page and locate

Get In Touch with Lexmark!

for contact information.

NOTE:

When calling for support, you will need your

printer model/machine type

and

serial number

(

SN

).

Please be near the products described in this article to expedite the support process and reduce call-back situations.

LEGACY ID:

SO7704