1. Support
  2. Printers
  3. Lexmark Forms Printer 2580n+
  4. Interactive user guide
  5. Lexmark SNMP MIB and OID Values Explained (May 2019)
Lexmark Forms Printer 2580n+

Lexmark Forms Printer 2580n+

Printer features: Dot matrix

Lexmark Forms Printer 2580n+ Support

Setup, installation, and configuration issues
How to set up OAuth 2.0
Restoring the 25XX Series Dot Matrix printers to the factory defaults
Configuring the 802.1X/EAP authentication on Lexmark wireless devices
What is IPSec and how to configure this data encryption feature
How to configure the network ready Lexmark 2581 or 2591 series Forms (Dot Matrix) printer in an AS/OS400 environment
How to Locate the Serial Number on a Lexmark 24xx/25xx/25xx+ Series Forms (Dot Matrix) Printer
Lexmark 25xx+ Forms (Dot Matrix) Printer ? How to Adjust the Power Saver Timeout
Lexmark 25xx+ Forms (Dot Matrix) Printer - How to Lock and Unlock the Operator Panel Buttons
How to perform network NVRAM reset
Lexmark 25xx+ Forms (Dot Matrix) Printer ? How to Properly Install the Ribbon Cartridge and Carrier Unit
How to Print a Continuous Hardware Test Page on a Lexmark Forms Printer 23XX, 24XX, and 25XX
Loading continuous paper and forms using the push tractor feed
Lexmark Forms Printer 258x or 259x Reinitializes when Connected Over the Network
How to set/change the 'Tear Off' position
Lexmark SNMP MIB and OID Values Explained (May 2019)
How to enable postscript print error information
Downloading fonts from a PCL 5 or PCL XL driver
Location of the power switch
Exporting and importing user-defined configuration settings
Capturing the Device Description (DEVD) and Output Queue (OUTQ) settings in AS/400
capturing-the-lpma-printer-discovery-tool-logs-ho4
Performing a network trace
How to use the Service Restore Tool to retrieve previously deployed licenses
Obtaining the Menu Settings page (MSP)
How to Copy/Upgrade the Printer Base Code via USB Cable
How to Copy/Upgrade the Printer Base Code via Parallel Cable
Capturing a spool or job file in Linux
Capturing a spool or job file in Macintosh OS
changing-the-geographic-region-setting-ho2599
How to change Date and Time & NTP server
Knowledge base
Setup, installation, and configuration issues

Lexmark SNMP MIB and OID Values Explained (May 2019)

Lexmark SNMP MIB and OID Values Explained

Issue description

SNMP
, short for
Simple Network Management Protocol
, is a set of protocols for managing network devices. SNMP works by sending messages called protocol data units (PDU) to different parts of a network. SNMP-compliant devices
*
 called "agents" store data about themselves in
Management Information Bases
 (
MIB
) and return this data to the SNMP requesters.
*
 Lexmark printers are SNMP-compliant devices.

MIB versions

Lexmark network laser printers support version 1 of the printer MIB. The Lexmark1.MIB draws off the RFC1759 and printer 3805 V2 standards. For some queries, the Lexmark printer replies “unknown” which is a valid response according to the RFC.

Examples of MIB implementation

Duplex MIB
 (OID – Object Identifier)
:
Using
prtMediaPathDescription
 (OID 1.3.6.1.2.1.43.13.4.1.10) should yield a return value:
  • SNMPv2-SMI::mib-2.43.13.4.1.10.1.2 = STRING: "
    Duplex
     Paper Path"
If a duplex is not recognized, you would only expect to see the return value:
  • SNMPv2-SMI::mib-2.43.13.4.1.10.1.1 = STRING: "
    Primary
     Paper Path"
Color MIB (
OID
):
Using
prtMarkerSuppliesDescription
 (OID 1.3.6.1.2.1.43.11.1.1.6) should yield a return value of the printer supplies. A partial list of return values is shown below. Values vary by printer model since different models have different supplies.
  • SNMPv2-SMI::mib-2.43.11.1.1.6.1.1 = STRING: "
    Black Cartridge
    "
  • SNMPv2-SMI::mib-2.43.11.1.1.6.1.2 = STRING: "
    Cyan Cartridge
    "
  • SNMPv2-SMI::mib-2.43.11.1.1.6.1.3 = STRING: "
    Fuser
    "
  • SNMPv2-SMI::mib-2.43.11.1.1.6.1.4 = STRING: "
    Transfer Module
    "
  • SSNMPv2-SMI::mib-2.43.11.1.1.6.1.5 = STRING: "
    Magenta Cartridge
    "

Lexmark MIB Documentation and Support Statement

Lexmark provides the MIB information below as a courtesy to network administrators who use SNMP management utilities. Lexmark does not directly support the use of third-party management tools for the administration of our printers and MFPs.
We provide specific information upon request but only if essential to the implementation of our product.
Download the Lexmark MIB file pack for the following contents:
  • Lexmark Private MIB (
    lexmark1.mib
    )
  • Lexmark Managed Print Services MIB (lexmark-mps-mib.mib)
  • Lexmark Root MIB (lexmark-root-mib.mib)
  • Lexmark Textual Conventions MIB (lexmark-tc-mib.mib)
  • HOST-RESOURCES-MIB.mib
  • LEXMARK-SETTINGS.mib
  • LEXMARK-SETTINGS-CONTROL.mib
  • LEXMARK-SETTINGS-DEFINITION.mib
  • Printer-MIB.mib
The referenced MIB files in this package are for use with later (2011 and above) generation products. However, the
lexmark1.mib
 file is viable for both current and older-generation products.
LEGACY ID:
FA615

This site uses cookies for various purposes including enhancing your experience, analytics, and ads. By continuing to browse this site or by clicking "Accept and close", you agree to our use of cookies. For more information, read our Cookies page.