1. Support
  2. Printers
  3. Lexmark M1246
  4. Interactive user guide
  5. Installation over WSD port from APW_System package
Lexmark M1246

Lexmark M1246

Printer features: Laser, print only, black & white

Lexmark M1246 Support

Installation over WSD port from APW_System package

Installation over WSD port from APW_System package.

Issue description

Here in this document, we will see how to install a
Lexmark CX331adwe
printer over
WSD
port from APW_system package.

Solution

Download the driver package from Lexmark Support site by searching for the printer model. Select the appropriate printer driver. Click here to view image.
After downloading the package, install the software driver into the system and connect the printer through WSD port.
There are two ways to install a printer over WSD port from APW package and those are:
  • Install Only (specifically for USB/WSD printer). This is recommended for USB connection as well as WSD port installation.
  • Extract (to install a printer over Standard TCP/IP or USB or WSD port). Recommended for network connection installation, however WSD port installation is still applicable.
Double click the installer (APW_system package installer) and click
“Accept”
for the Licence Agreement. See EULA image here.
Follow steps below for the
”Install Only”
option:
  1. After accepting the License Agreement, the Select an Installation Type window appears. Select
    Install Only
    then click the
    Start
    button.
  2. Once installation is complete, open
    Devices and Printers
    from
    Control Panel
    and click on Add Printer.
  3. Select
    “The printer that I want isn’t listed”
    .
  4. Choose “Add a printer using IP Address or hostname” from the radio buttons selection, then click
    Next
    .
  5. Select “Web Services Devices” in
    Device Type
    and type in the printer IP address and click on
    Next
    .
  6. Type a printer name (by default, printer’s hostname will be shown), then click
    Next
    .
  7. Select Printer Sharing option as per requirements of sharing, then click
    Next
    .
  8. Finally click Finish to complete the installation setup.
The newly created print object over WSD port will be shown in
Control Panel > Devices and Printers
. You can use the Windows Fax and Scan feature by right clicking the printer icon and select Start Scan option.
Follow steps below for the
“Extract”
option:
  1. In the
    “Select an Installation Type window”
    , select Extract option and click the
    Browse
    button to select the path where the extracted folder will be stored.
    By default the box for the
    ”Launch the Add Printer Wizard after extraction completes”
    is already checked. After the extraction, control panel will be launched automatically (which is recommended).
  2. Click
    Start
    to begin.
  3. Once extraction is complete,
    Add Printer
    wizard will pop up.
  4. Install Only to setup installation over WSD port.
If you want to view this document in PDF form,click here.
If the issue persists, search for more information related to this issue or contact support for further assistance.