Installing print queue-based driver in Windows 10

Video: Print Queue-Based Driver Installation in Windows 10

Issue description

This video is provided for demonstration purposes only
. It is intended to familiarize users with the installation of a print queue-based Universal Print Driver (UPD)
PS using the driver and software CD.

Windows 10 drivers may not
be immediately available. In the meantime, you may use Windows 8
or 8.1
driver packages for Windows 10 supported printers.

Solution

The following sequence of procedures to be performed are summarized below :

Observe extraction of files to a temporary folder.

Accept the License Agreement.

Remove the check mark next to "Launch the Add Printer Wizard after extraction completes
".

Extract to C:\Lexmark\Lexmark_Universal_v2_UD1_PS
.

Make sure to take note of this path.

Locate the extraction location via File Explorer
> This PC
> Local Disk (C:)
> Lexmark
> Lexmark_Universal_v2_UD1_PS
> Drivers
> Print
> GDI
and copy this directory path (Ctrl +C)
.

Open Control Panel
> Hardware and Sound
> View devices and printers
.

Click Print server properties
> Drivers tab
> Change Driver Settings
> Add
.

Click Next
in Add Printer Driver Wizard
.

Select x86
for 32-bit
, and x64
for 64-bit
OSes/drivers.

Click Have Disk...

Press Ctrl + V
in dialog for Copy manufacturer's files from:
to paste the directory C:\Lexmark\Lexmark_Universal_v2_UD1_PS\
Drivers\
Print\
GDI
.

Highlight the printer and clicking Next
, and then Finish

Notice that a new print driver entry appears under Print server properties
.

Click Close
.

Select
Add a printer
.

Select Add a printer using a
TCP/IP address or hostname
, and click
Next
.

Select Device type: TCP/IP Device
.

Enter the printer Hostname
or IP Address
, and click Next
.

Select Lexmark
from the Manufacturer list
.

Locate the print driver under Printers
, and click Next
.

This is the same driver you saw under Print server properties
.

Select Replace the current driver
, and click Next
.

Type a printer name (optional).

Click Next
to see Installing printer...
.

Select Share this printer so that others on your network can find and use it
.

Enter a share name, click Next
.

Click Finish
.

A new printer appears under Devices and Printers
.

LEGACY ID: HO3976