Copy Defaults
Menu item | Description |
|---|---|
Content Type Text Text/Photo* Photo Graphics | Improve the output result based on the content of the original document. |
Content Source Black and White Laser Color Laser* Inkjet Photo/Film Magazine Newspaper Press Other | Improve the output result based on the source of the original document. |
Sides 1 sided to 1 sided* 1 sided to 2 sided 2 sided to 1 sided 2 sided to 2 sided | Specify the scanning behavior based on the original document. |
Separator Sheets None* Between Copies Between Jobs Between Pages | Specify whether to insert blank separator sheets when printing. |
Separator Sheet Source Tray [x] (1*) Multipurpose Feeder | Specify the paper source for the separator sheet. |
Color Off On* Auto | Set the printer to generate color output from a scan job. |
Pages per Side Off* 2 Portrait pages 4 Portrait pages 2 Landscape pages 4 Landscape pages | Specify the number of page images to print on one side of a sheet of paper. |
Print Page Borders Off* On | Place a border around each image when printing multiple pages on a single page. |
Collate Off [1,1,1,2,2,2] On [1,2,1,2,1,2]* | Print multiple copies in sequence. |
“Copy from” Size [List of paper sizes] | Set the paper size of the original document. Letter is the U.S. factory default setting. A4 is the international factory default setting. |
“Copy to” Source Tray [x] (1*) Multipurpose Feeder Auto Size Match | Specify the paper source for the copy job. |
Temperature ‑4 to 4 (0*) | Specify whether to generate a cooler or warmer output. |
Darkness 1 to 9 (5*) | Adjust the darkness of the scanned image. |
Number of Copies 1–9999 (1*) | Specify the number of copies. |
Header/Footer Left Header Middle Header Right Header Left Footer Middle Footer Right Footer | Specify the header or footer information on the scanned image. |
Overlay Confidential Copy Draft Urgent Custom Off* | Specify the overlay text to print on each copy. |
Custom overlay | Type the text for the Custom choice in the Overlay menu. |
An asterisk (*) next to a value indicates the factory default setting.
Menu item | Description |
|---|---|
Color Balance Cyan (0* Magenta (0*) Yellow (0*) | Adjust the color intensity for cyan, magenta, and yellow. |
Color Dropout Color Dropout (None*) Default Red Threshold (128*) Default Green Threshold (128*) Default Blue Threshold(128*) | Specify which color to drop during scanning, and adjust the dropout setting for that color. |
Auto Color Detect Color Sensitivity (5*) Area Sensitivity (5*) | Configure the auto color detection setting. |
Contrast Best for content* 0–5 | Specify the contrast for the scanned image. |
Background Removal Background Detection (Content‑based*) Level (0*) | Remove the background color or image noise from the original document.
|
Auto Center Off* On | Align the content at the center of the page. |
Mirror Image Off* On | Create a mirror image of the original document. |
Negative Image Off* On | Create a negative image of the original document. |
Shadow Detail ‑4 to 4 (0*) | Adjust the shadow detail in the original document. |
Scan Edge to Edge Off* On | Scan the original document from edge to edge. |
Sharpness 1–5 (3*) | Adjust the sharpness of the scanned image. |
An asterisk (*) next to a value indicates the factory default setting.
Menu item | Description |
|---|---|
Allow Color Copies Off On* | Print copies in color. |
Allow Priority Copies Off On* | Interrupt a print job to make copies. |
Custom Job Scanning Off* On | Set the printer to scan the first set of original documents using the specified settings, and then scan the next set with the same or different settings. This menu item appears only when a hard disk or an intelligent storage drive (ISD) is installed. |
Allow Save as Shortcut Off On* | Save copy settings as a shortcut. |
Adjust ADF Skew Off On* | Set the printer to adjust the skewed images from documents that are scanned from the ADF. |
Sample copy Off* On | Print a sample copy to check the quality before printing the remaining copies. This menu item appears only when a hard disk or an ISD is installed. |
An asterisk (*) next to a value indicates the factory default setting.