Ethernet
Menu item | Description |
|---|---|
Network Speed | Show the speed of the active network adapter. |
IPv4 Enable DHCP (On*) Set Static IP Address | Configure the IPv4 settings. |
IPv6 Enable IPv6 (On*) Enable DHCPv6 (Off*) Stateless Address Autoconfiguration (On*) DNS Server Address Manually Assigned IPv6 Address Manually Assigned IPv6 Router Address Prefix (64*) All IPv6 Addresses All IPv6 Router Addresses | Configure the IPv6 settings. |
Network Address UAA LAA | Specify the network address. |
PCL SmartSwitch Off On* | Set the printer to switch automatically to PCL emulation when a print job requires it, regardless of the default printer language. When this setting is disabled, the printer does not examine incoming data and uses the default printer language specified in the Setup menu. |
PS SmartSwitch Off On* | Set the printer to switch automatically to PostScript emulation when a print job requires it, regardless of the default printer language. When this setting is disabled, the printer does not examine incoming data and uses the default printer language specified in the Setup menu. |
Job Buffering Off* On | Temporarily store jobs on the hard disk before printing. This menu item appears only when a hard disk is installed. |
Mac Binary PS Auto* On Off | Set the printer to process Macintosh binary PostScript print jobs.
|
Energy Efficient Ethernet On Off Auto* | Reduce power consumption when the printer does not receive data from the Ethernet network. |
An asterisk (*) next to a value indicates the factory default setting.