Changing the printer port settings after installing an internal solutions port
  1. guides
  2. en
  3. User's Guide
  4. Set up, install, and configure
  5. Installing hardware options
  6. Changing the printer port settings after installing an internal solutions port

Changing the printer port settings after installing an internal solutions port

Get the IP address of your printer after installing a new internal solutions port.
  • If the printer has a static IP address, then do not change the configuration.
  • If the computers are configured to use the network name instead of an IP address, then do not change the configuration.
  • If you are adding a wireless internal solutions port (ISP) to a printer previously configured for an Ethernet connection, then disconnect the printer from the Ethernet network.
For Windows users
  1. Open the printers folder.
  2. From the shortcut menu of the printer with the new ISP, open the printer properties.
  3. Configure the port from the list.
  4. Update the IP address.
  5. Apply the changes.
For Macintosh users
  1. From
    System Preferences
     in the
    Apple
     menu, navigate to the list of printers, and then select
    +
    >
    IP
    .
  2. Type the IP address in the address field.
  3. Apply the changes.

This site uses cookies for various purposes including enhancing your experience, analytics, and ads. By continuing to browse this site or by clicking "Accept and close", you agree to our use of cookies. For more information, read our Cookies page.