PCL
Menu item | Description |
|---|---|
Font Name [List of available fonts] (Courier*) | Select a font from the specified font source. |
Symbol Set [List of available symbol set] (10U PC‑8*) | Specify the symbol set for each font name. A symbol set is a set of alphabetic and numeric characters, punctuation, and special symbols. Symbol sets support the different languages or specific programs such as math symbols for scientific text. |
Pitch 0.08–100 (10*) | Specify the pitch for fixed or monospaced fonts. Pitch refers to the number of fixed‑space characters in a horizontal inch of type. |
Orientation Portrait* Landscape Reverse Portrait Reverse Landscape | Specify the orientation of text and graphics on the page. |
Lines per Page 1–255 | Specify the number of lines of text for each page printed through the PCL® data stream.
|
PCL5 Minimum Line Width 1–30 (2*) | Set the initial minimum stroke width of any job printed in 1200 dpi. |
PCLXL Minimum Line Width 1–30 (2*) | |
A4 Width 198 mm* 203 mm | Set the width of the logical page on A4‑size paper. Logical page is the space on the physical page where data is printed. |
Auto CR after LF Off* On | Set the printer to perform a carriage return after a line feed control command. Carriage return is a mechanism that commands the printer to move the position of the cursor to the first position on the same line. |
Auto LF after CR Off* On | Set the printer to perform a line feed after a carriage return control command. |
Print Timeout Disabled Enabled* | Enable the printer to end a print job after it has been idle for the specified amount of time in seconds. |
Print Timeout Time 1–255 (90*) | Set the time in seconds for the printer to end a print job after it has been idle. This menu item appears only when Print Timeout is enabled. |
An asterisk (*) next to a value indicates the factory default setting.