TCP/IP
This menu appears only in network printers or printers attached to print servers.
Menu item | Description |
|---|---|
Set Hostname | Set the current TCP/IP host name. |
Domain Name | Set the domain name. This menu item is available only in some printer models. |
Allow DHCP/BOOTP to update NTP server On* Off | Allow the DHCP and BOOTP clients to update the NTP settings of the printer. |
Zero Configuration Name | Specify a service name for the zero configuration network. This menu item is available only in some printer models. |
Enable Auto IP On* Off | Assign an IP address automatically. |
DNS Address | Specify the current Domain Name System (DNS) server address. |
Backup DNS | Specify the backup DNS server addresses. |
Backup DNS 2 | |
Backup DNS 3 | |
Domain Search Order | Specify a list of domain names to locate the printer and its resources that reside in different domains on the network. This menu item is available only in some printer models. |
Enable DDNS Off* On | Update the Dynamic DNS settings. |
DDNS TTL | Specify the current DDNS settings. |
Default TTL | |
DDNS Refresh Time | |
Enable mDNS On* Off | Update multicast DNS settings. |
WINS Address | Specify a server address for Windows Internet Name Service (WINS). |
Enable BOOTP Off* On | Allow the BOOTP to assign a printer IP address. |
MTU | Specify a maximum transmission unit (MTU) parameter for the TCP connections. The maximum limit is 1500. |
Restricted Server List | Specify an IP address for the TCP connections.
|
Restricted Server List Options Block All Ports* Block Printing Only Block Printing and HTTP Only | Specify how the IP addresses in the list can access the printer functionality.
|
Raw Print Port 1–65535 (9100*) | Specify a raw port number for printers connected on a network. |
Outbound Traffic Maximum Speed Disabled* Enabled | Enable the printer maximum transfer rate. |
Enable TLSv1.0 On* Off | Enable the TLSv1.0 protocol. |
Enable TLSv1.1 On* Off | Enable the TLSv1.1 protocol. |
SSL Cipher List | Specify the cipher algorithms to use for the SSL or the TLS connections. |
An asterisk (*) next to a value indicates the factory default setting.