Ethernet
Menu item | Description |
|---|---|
Network Speed | Show the speed of an active network adapter. |
IPv4 Enable DHCP On* Off | Enable Dynamic Host Configuration Protocol (DHCP). DHCP is a standard protocol that allows a server to distribute IP addressing and configuration information to clients in a dynamic manner. |
IPv4 Set Static IP Address IP Address Netmask Gateway | Set the static IP address of your printer. |
IPv6 Enable IPv6 On* Off | Enable IPv6 in the printer. |
IPv6 Enable DHCPv6 Off* On | Enable DHCPv6 in the printer. |
IPv6 Stateless Address Autoconfiguration On* Off | Set the network adapter to accept the automatic IPv6 address configuration entries provided by a router. |
IPv6 DNS Address | Specify the DNS server address. |
IPv6 Address Prefix 0–128 (64*) | Specify the address prefix. |
IPv6 All IPv6 Addresses | Show all IPv6 addresses. |
IPv6 All IPv6 Router Addresses | Show all IPv6 router addresses. |
Network Address UAA LAA | Show the printer Media Access Control (MAC) addresses: Locally Administered Address (LAA) and Universally Administered Address (UAA). You can change the printer LAA manually. |
PCL SmartSwitch On* Off | Set the printer to switch automatically to PCL emulation when a print job requires it, regardless of the default printer language. If PCL SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. |
PS SmartSwitch On* Off | Set the printer to switch automatically to PS emulation when a print job requires it, regardless of the default printer language. If PS SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. |
Mac Binary PS Auto* On Off | Set the printer to process Macintosh binary PostScript print jobs.
|
Energy Efficient Ethernet Auto* On Off | Reduce power consumption when the printer does not receive data from the Ethernet network. |
An asterisk (*) next to a value indicates the factory default setting.