Universal Setup
  1. guides
  2. en
  3. User's Guide
  4. Use printer menus
  5. Paper
  6. Media Configuration
  7. Universal Setup

Universal Setup

Menu item
Description
Units of Measure

    Inches

    Millimeters

Specify the unit of measurement for the universal paper.
Inches is the U.S. factory default setting. Millimeters is the international factory default setting.
Portrait Width

    3.00–14.17 inches (8.50*)

    76–360 mm (216*)

Set the portrait width of the universal paper.
Portrait Height

    3.00–14.17 inches (14*)

    76–360 mm (356*)

Set the portrait height of the universal paper.
Feed Direction

    Short Edge*

    Long Edge

Set the printer to pick paper from the short edge or long edge direction.
Long Edge appears only when the longest edge is shorter than the maximum width supported.
An asterisk (*) next to a value indicates the factory default setting.

This site uses cookies for various purposes including enhancing your experience, analytics, and ads. By continuing to browse this site or by clicking "Accept and close", you agree to our use of cookies. For more information, read our Cookies page.