Connecting the printer to a wireless network using Wi‑Fi Protected Setup (WPS)
The following procedure shows you how to set the WPS to simplify the connection process between your printer and a wireless network.
Using the Push Button method
- From the control panel, navigate to:
>Network/Ports>
>Wireless>
>Wi‑Fi Protected Setup>
>Start Push Button Method> - Follow the instructions on the display.
Using the personal identification number (PIN) method
- From the control panel, navigate to:
>Network/Ports>
>Wireless>
>Wi‑Fi Protected Setup>
>Start PIN Method>
- Copy the eight‑digit WPS PIN.
- Open a web browser, and then type the IP address of your access point in the address field.
- To know the IP address, see the documentation that came with your access point.
- If you are using a proxy server, then temporarily disable it to load the web page correctly.
- Access the WPS settings. For more information, see the documentation that came with your access point.
- Enter the eight‑digit PIN, and then save the changes.