Configuration Menu
Menu item | Description |
|---|---|
USB Configuration USB PnP
1*
2
| Change the USB driver mode of the printer to improve its compatibility with a personal computer. |
USB Configuration USB Scan to Local
Off
On*
| Set whether the USB device driver enumerates as a USB Simple device (single interface) or as a USB Composite device (multiple interfaces). |
USB Configuration USB Speed
Full
Auto*
| Set the USB port to run at full speed and disable its high‑speed capabilities. |
Tray Configuration Size Sensing Tray [x] Sensing
Off
On*
| Set the tray to sense automatically the paper size loaded into it. |
Tray Configuration Tray Linking
Automatic*
Off
| Set the printer to link the trays that have the same paper type and paper size settings. |
Tray Configuration Show Tray Insert Message
Off
Only for unknown sizes*
Always
| Display a message that lets the user change the paper size and paper type settings after inserting the tray. |
Tray Configuration A5 Loading
Short Edge
Long Edge*
| Determine the default loading orientation for the A5 size paper in all paper sources. |
Tray Configuration Paper Prompts
Auto*
Multipurpose Feeder
Manual Paper
| Set the paper source that the user fills when a prompt to load paper appears. |
Tray Configuration Envelope Prompts
Auto*
Multipurpose Feeder
Manual Envelope
| Set the paper source that the user fills when a prompt to load envelope appears. |
Tray Configuration Action for Prompts
Prompt user*
Continue
Use current
| Set the printer to resolve paper- or envelope-related change prompts. |
Reports
Menu Settings Page
Event Log
Event Log Summary
HealthCheck Statistics
| Print reports about printer menu settings, status, and event logs. |
Supply Usage And Counters Clear Supply Usage History | Reset the supply page counter or view the total printed pages. |
Printer Emulations PPDS Emulation
Off*
On
| Set the printer to recognize and use the PPDS data stream. |
Printer Emulations PS Emulation
Off
On*
| Set the printer to recognize and use the PS data stream. |
Printer Emulations Emulator Security Page Timeout 0–60 (60*) | Set the page timeout during emulation. |
Printer Emulations Emulator Security Reset Emulator After Job
Off*
On
| Reset the emulator after a print job. |
Printer Emulations Emulator Security Disable Printer Message Access
Off
On*
| Disable access to printer message during emulation. |
Fax Configuration Fax Low Power Support
Disable Sleep
Permit Sleep
Auto*
| Set fax to enter Sleep mode whenever the printer determines that it should. |
Fax Configuration Fax Storage Location
NAND
Disk*
| Set the storage location for all faxes. This menu item appears only when a hard disk is installed. |
Print Configuration Font Sharpening 0–150 (24*) | Set a text point-size value below which the high‑frequency screens are used when printing font data. For example, if the value is 24, then all fonts sized 24 points or less use the high‑frequency screens. |
= Print Configuration Print Density
1–5 (3*) Copy Density
1–5 (3*) | Adjust the toner density when printing or copying documents. |
Print Configuration A4 Fuser
Compress*
Clip
| Set the fuser behavior when printing on a letter-size paper. |
Device Operations Quiet Mode
Off*
On
| Set the printer to operate in Quiet Mode. Enabling this setting slows down the overall performance of the printer. |
Device Operations Safe Mode
Off*
On
| Set the printer to operate in a special mode, in which it attempts to continue offering as much functionality as possible, despite known issues. For example, when set to On, and the duplex motor is nonfunctional, the printer performs one‑sided printing of the documents even if the job is two‑sided printing. |
Device Operations Minimum Copy Memory
20 MB*
30 MB
50 MB
80 MB
100 MB
| Set the minimum memory allocation for storing copy jobs. |
Device Operations Clear Custom Status | Erase user‑defined strings for the Default or Alternate custom messages. |
Device Operations Clear all remotely‑installed messages | Erase messages that were remotely installed. |
Device Operations Automatically Display Error Screens
Off
On*
| Show existing error messages on the display after the printer remains inactive on the home screen for a length of time equal to the Screen Timeout setting. |
Device Operations Honor orientation on fast path copy
Off*
On
| Enable the printer to use the orientation setting under the Copy menu when sending quick copy jobs. |
App Configuration LES Applications
Off
On*
| Enable the Lexmark Embedded Solutions (LES) applications.
|
Scanner Configuration Scanner Manual Registration Print Quick Test | Print a Quick Test target page. Make sure that the margin spacing on the target page is uniform all the way around the target. If it is not, then the printer margins must be reset. |
Scanner Configuration Scanner Manual Registration
Front ADF Registration
Rear ADF Registration
Flatbed Registration
| Manually register the flatbed and ADF after replacing the ADF, scanner glass, or controller board. |
Scanner Configuration Reset Maintenance Counter Resetting ADF Maintenance Counter | Reset the counter after replacing the ADF maintenance kit. |
Scanner Configuration Edge Erase
Flatbed Edge Erase (3*)
ADF Edge Erase (3*)
| Set the size, in millimeters, of the no‑print area around an ADF or flatbed scan job. |
Scanner Configuration ADF Deskew ADF Electronic Deskew(On*) | Reduce skewing of documents that are scanned from the ADF. |
Scanner Configuration Disable Scanner
Enabled*
Disabled
ADF Disabled
| Disable the scanner when it is not working properly. |
Scanner Configuration Tiff Byte Order
CPU Endianness*
Little Endian
Big Endian
| Set the byte order of a TIFF‑formatted scan output. |
Scanner Configuration Exact Tiff Rows Per Strip
On*
Off
| Set the RowsPerStrip tag value of a TIFF‑formatted scan output. |
An asterisk (*) next to a value indicates the factory default setting.