Setting up Card Copy
  1. guides
  2. en
  3. User's Guide
  4. Set up, install, and configure
  5. Setting up and using the home screen applications
  6. Using Card Copy
  7. Setting up Card Copy

Setting up Card Copy

Save time and effort in copying identification cards, licenses, and insurance cards.
This application is supported only in some printer models. For more information, see Supported applications.
  1. Open a web browser, and then type the printer IP address in the address field.
    • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
    • If you are using a proxy server, then temporarily disable it to load the web page correctly.
  2. Click
    Apps
    >
    Card Copy
    >
    Configure
    .
    • Make sure that Display Icon is enabled.
    • Make sure that E‑mail Settings and Network Share Settings are configured.
    • When scanning a card, make sure that the scan resolution does not exceed 200 dpi for color and 400 dpi for black and white.
    • When scanning multiple cards, make sure that the scan resolution does not exceed 150 dpi for color and 300 dpi for black and white.
    • You need a printer hard disk to scan multiple cards.
  3. Apply the changes.

This site uses cookies for various purposes including enhancing your experience, analytics, and ads. By continuing to browse this site or by clicking "Accept and close", you agree to our use of cookies. For more information, read our Cookies page.