Adjusting scanner registration
  1. guides
  2. en
  3. User's Guide
  4. Troubleshoot a problem
  5. Scanning problems
  6. Adjusting scanner registration

Adjusting scanner registration

Align the scan area of the scanner glass with the paper location to avoid cropped images when scanning.
  1. From the control panel, navigate to:
    >
    Settings
    >
    >
    Device
    >
    >
    Maintenance
    >
    >
    Config Menu
    >
    >
    Scanner Configuration
    >
    >
    Scanner Manual Registration
    >
  2. Select
    Print Quick Test
    , and then press .
  3. Place the Print Quick Test page on the scanner glass, and then select
    Flatbed Registration
    .
  4. Select
    Copy Quick Test
    , and then press .
  5. Compare the Copy Quick Test page with the original document.
    If the margins of the test page are different from the original document, then adjust Left Margin and Top Margin.
  6. Repeat step 4 and step 5 until the margins of the Copy Quick Test page closely match the original document.

This site uses cookies for various purposes including enhancing your experience, analytics, and ads. By continuing to browse this site or by clicking "Accept and close", you agree to our use of cookies. For more information, read our Cookies page.