Connecting the printer to a wireless network using Wi‑Fi Protected Setup (WPS)
  1. guides
  2. en
  3. User's Guide
  4. Set up, install, and configure
  5. Networking
  6. Connecting the printer to a wireless network using Wi‑Fi Protected Setup (WPS)

Connecting the printer to a wireless network using Wi‑Fi Protected Setup (WPS)

The following procedure shows you how to set the WPS to simplify the connection process between your printer and a wireless network.
Using the Push Button method
  1. From the control panel, navigate to:
    >
    Network/Ports
    >
    >
    Wireless
    >
  2. Select
    Wi‑Fi Protected Setup
    , and then press .
  3. Select
    Start Push Button Method
    , and then press .
  4. Follow the instructions on the display.
Using the personal identification number (PIN) method
  1. From the control panel, navigate to:
    >
    Network/Ports
    >
    >
    Wireless
    >
  2. Select
    Wi‑Fi Protected Setup
    >
    >
    Start PIN Method
    >
    .
  3. Copy the eight‑digit WPS PIN.
  4. Open a web browser, and then type the IP address of your access point in the address field.
    • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
    • If you are using a proxy server, then temporarily disable it to load the web page correctly.
  5. Access the WPS settings. For more information, see the documentation that came with your access point.
  6. Enter the eight‑digit PIN, and then save the changes.

This site uses cookies for various purposes including enhancing your experience, analytics, and ads. By continuing to browse this site or by clicking "Accept and close", you agree to our use of cookies. For more information, read our Cookies page.