Updating the firmware using the Embedded Web Server
  1. guides
  2. en
  3. User's Guide
  4. Upgrade and migrate
  5. Firmware
  6. Printer firmware instructions
  7. Updating firmware
  8. Updating the firmware using the Embedded Web Server

Updating the firmware using the Embedded Web Server

Follow these steps on how to update the firmware in your printer remotely.
  • Before you begin, make sure that you have downloaded the firmware and saved it on your computer or flash drive. For more information, see Downloading the printer firmware.
  • Make sure that the printer is connected to the network.

Using the update button

  1. Open a web browser, and then type the printer IP address in the address field.
    • The IP address appears as four sets of numbers separated by periods. For example, 123.123.123.123.
    • If you are using a proxy server, then temporarily disable it to load the web page correctly.
  2. Click
    Device
    .
  3. Scroll down, and then click
    Firmware Update
    .
  4. Depending on your printer model, click
    Check for updates
     or
    Check for updates now
    .
    If an update is available, then click
    Install now
    .
    The printer restarts automatically after the update.

Using the firmware flash file (.fls)

  1. Open a web browser, and then type the printer IP address in the address field.
    • The IP address appears as four sets of numbers separated by periods. For example, 123.123.123.123.
    • If you are using a proxy server, then temporarily disable it to load the web page correctly.
  2. Click
    Device
    .
  3. Scroll down, and then click
    Firmware Update
    .
  4. In the
    Update Firmware from File
     section, click
    Browse
    .
  5. Search, and then select the
    .fls
     file.
  6. Click
    Upload
    .
    The printer restarts automatically after the update.

This site uses cookies for various purposes including enhancing your experience, analytics, and ads. By continuing to browse this site or by clicking "Accept and close", you agree to our use of cookies. For more information, read our Cookies page.