Installing a memory card
  1. guides
  2. en
  3. User's Guide
  4. Set up, install, and configure
  5. Installing internal options
  6. Installing a memory card

Installing a memory card

Expand the memory capacity of your printer in order to print complex jobs and collate large print jobs.
To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.
  1. Turn off the printer, and then unplug the power cord from the electrical outlet.
  2. Using a flat‑head screwdriver, remove the controller board access cover.
    Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer before touching any controller board components or connectors.
  3. Unpack the memory card.
    Avoid touching the connection points along the edge of the card.
  4. Insert the memory card until it
    clicks
     into place.
  5. Reattach the access cover.
  6. Connect the power cord to the electrical outlet, and then turn on the printer.
    To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.

This site uses cookies for various purposes including enhancing your experience, analytics, and ads. By continuing to browse this site or by clicking "Accept and close", you agree to our use of cookies. For more information, read our Cookies page.