Replacing the imaging unit
  1. guides
  2. en
  3. User's Guide
  4. Maintain
  5. Replacing parts and supplies
  6. Replacing the imaging unit

Replacing the imaging unit

Avoid printing delays. Install a new imaging unit when the printer prompts you to replace it.
  1. Open door B.
  2. Remove the waste toner bottle.
  3. Remove the imaging kit.
  4. Remove the black toner cartridge.
  5. Remove the imaging unit.
    Do not expose the photoconductor unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.
    Do not touch the shiny photoconductor drum under the imaging kit. Doing so may affect the quality of future print jobs.
  6. Unpack the new imaging unit.
  7. Insert the new imaging unit.
  8. Insert the black toner cartridge.
  9. Insert the imaging kit.
  10. Insert the waste toner bottle.
  11. Close door B.

This site uses cookies for various purposes including enhancing your experience, analytics, and ads. By continuing to browse this site or by clicking "Accept and close", you agree to our use of cookies. For more information, read our Cookies page.