Adjusting Sleep mode
  1. guides
  2. en
  3. User's Guide
  4. Saving money and the environment
  5. Saving energy
  6. Adjusting Sleep mode

Adjusting Sleep mode

To save energy, decrease the number of minutes before the printer enters Sleep mode. Select from 1 to 120. The factory default setting is 30 minutes.
The printer still accepts print jobs when in Sleep mode.
Using the Embedded Web Server
  1. Open a Web browser, and then type the printer IP address in the address field.
    • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
    • If you are using a proxy server, then temporarily disable it to load the Web page correctly.
  2. Navigate to:
    Settings
    >
    General Settings
    >
    Timeouts
  3. In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep mode.
  4. Click
    Submit
    .

Using the printer control panel
  1. From the printer control panel, navigate to:
    >
    Settings
    >
    >
    Settings
    >
    >
    General Settings
    >
    >
    Timeouts
    >
    >
    Sleep Mode
    >
  2. In the Sleep Mode field, select the number of minutes you want the printer to wait before it enters Sleep mode.
  3. Press .

This site uses cookies for various purposes including enhancing your experience, analytics, and ads. By continuing to browse this site or by clicking "Accept and close", you agree to our use of cookies. For more information, read our Cookies page.