Setting Hibernate Timeout
  1. guides
  2. en
  3. User's Guide
  4. Saving money and the environment
  5. Saving energy
  6. Setting Hibernate Timeout

Setting Hibernate Timeout

Hibernate Timeout lets you set the amount of time the printer waits after a print job is processed before it goes into a reduced power state.
Using the Embedded Web Server
  1. Open a Web browser, and then type the printer IP address in the address field.
    • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
    • If you are using a proxy server, then temporarily disable it to load the Web page correctly.
  2. Click
    Settings
    >
    General Settings
    >
    Timeouts
    .
  3. From the Hibernate Timeout menu, select the number of hours, days, weeks, or months you want for the printer to wait before it goes into a reduced power state.
  4. Click
    Submit
    .

Using the printer control panel
  1. From the printer control panel, navigate to:
    >
    Settings
    >
    General Settings
    >
    Timeouts
    >
    Hibernate Timeout
  2. Select the amount of time the printer waits after a print job is processed before it enters Hibernate mode.
  3. Touch
    Submit
    .

This site uses cookies for various purposes including enhancing your experience, analytics, and ads. By continuing to browse this site or by clicking "Accept and close", you agree to our use of cookies. For more information, read our Cookies page.