Setup menu

Use	To
Printer Language PCL Emulation PS Emulation	Set the default printer language. PCL Emulation is the factory default setting. PostScript emulation uses a PostScript interpreter for processing print jobs. PCL Emulation uses a PCL interpreter for processing print jobs. Setting a printer language default does not prevent a software program from sending print jobs that use another printer language.
Print Area Normal Whole Page	Set the logical and physical printable area. Normal is the factory default setting. When attempting to print data on the non‑printable area defined by the Normal setting, the printer clips the image at the boundary. Whole Page allows the image to be moved into the non‑printable area defined by the Normal setting. This setting affects only pages printed using a PCL 5 interpreter and has no effect on pages printed using the PCL XL or PostScript interpreter.
Download Target RAM Flash	Set the storage location for downloads. RAM is the factory default setting. Storing downloads in the RAM is temporary. Storing downloads in a flash memory places them in permanent storage. Downloads remain in the flash memory even when the printer is turned off. This menu item appears only when an optional flash memory is installed.
Resource Save On Off	Specify how the printer handles temporary downloads, such as fonts and macros stored in the RAM, when the printer receives a print job that requires more than the available memory. Off is the factory default setting. Off sets the printer to retain downloads only until memory is needed. Downloads are deleted in order to process print jobs. On sets the printer to retain downloads during language changes and printer resets. If the printer runs out of memory, then Memory Full [38] appears on the printer display, but downloads are not deleted.