Using the Embedded Web Server
  1. guides
  2. en
  3. User's Guide
  4. Learning about the printer
  5. Using the Embedded Web Server

Using the Embedded Web Server

This feature is available only in network printers or printers connected to print servers.
If the printer is installed on a network, then you can use the Embedded Web Server to do the following:
  • View the virtual display of the printer control panel.
  • Check the status of the printer supplies.
  • Configure supply notifications.
  • Configure printer settings.
  • Configure network settings.
  • View reports.
To access the Embedded Web Server for your printer:
  1. Obtain the printer IP address:
    • From the TCP/IP section in the Network/Ports menu
    • By printing a network setup page or menu settings page, and then finding the TCP/IP section
      • An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
      • If you are using a proxy server, then temporarily disable it to load the Web page correctly.
  2. Open a Web browser, and then type the printer IP address in the address field.
  3. Press
    Enter
    .
    The Embedded Web Server page appears.

This site uses cookies for various purposes including enhancing your experience, analytics, and ads. By continuing to browse this site or by clicking "Accept and close", you agree to our use of cookies. For more information, read our Cookies page.