Embedded Web Server does not open
  1. guides
  2. en
  3. User's Guide
  4. Troubleshooting
  5. Embedded Web Server does not open

Embedded Web Server does not open

  1. Make sure the printer IP address is correct.
    An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
    View the printer IP address:
    • From the printer home screen
    • From the TCP/IP section in the Network/Ports menu
    • By printing a network setup page or menu settings page, and then finding the TCP/IP section
    Is the printer IP address correct?
    • Yes
      :
      Go to the next step.
    • No
      :
      Type the correct printer IP address in the address field of your Web browser.
      Depending on the network settings, you may need to type “
      https
      ://” instead of “
      http
      ://” before the printer IP address to access the Embedded Web Server.
  2. Check if the printer is turned on.
    Is the printer turned on?
    • Yes
      :
      Go to the next step.
    • No
      :
      Turn on the printer.
  3. Check if the network connection is working.
    Is the network connection working?
    • Yes
      :
      Go to the next step.
    • No
      :
      Contact your system support person.
  4. Make sure the cable connections to the printer and print server are secure.
    For more information, see the setup documentation that came with the printer.
    Are the cable connections to the printer and print server secure?
    • Yes
      :
      Go to the next step.
    • No
      :
      Tighten the cable connection.
  5. Temporarily disable the Web proxy servers.
    Proxy servers may block or restrict you from accessing certain Web sites including the Embedded Web Server.
    Are the Web proxy servers disabled?
    • Yes
      :
      Go to the next step.
    • No
      :
      Contact your system support person.
  6. Access the Embedded Web Server again by typing the correct IP address in the address field.
    Did the Embedded Web Server open?
  7. Access the Embedded Web Server again by typing the correct IP address in the address field.
    Did the Embedded Web Server open?
    • Yes
      :
      The problem is solved.
    • No
      :
      Contact .

This site uses cookies for various purposes including enhancing your experience, analytics, and ads. By continuing to browse this site or by clicking "Accept and close", you agree to our use of cookies. For more information, read our Cookies page.