Connecting the printer to a wireless network using the Wi-Fi Protected Setup
Using the Push Button Configuration method
- Depending on your printer model, navigate to either of the following:
>Settings>
>Networks/Ports>
>Network [x]>
>Network [x] Setup>
>Wireless>
>Wi‑Fi Protected Setup>
>Start Push Button Method
>Network/Ports>Network [x]>Network [x] Setup>Wireless>Wi‑Fi Protected Setup>Start Push Button Method
>Network/Ports>Network [x]>Network [x] Setup>Wireless>Wi‑Fi Protected Setup>Start Push Button Method
- Follow the instructions on the printer display.
Using the Personal Identification Number (PIN) method
- Depending on your printer model, navigate to either of the following:
-
>Settings>
>Networks/Ports>
>Network [x]>
>Network [x] Setup>
>Wireless>
>Wi‑Fi Protected Setup>
>Start PIN Method
-
>Network/Ports>Network [x]>Network [x] Setup>Wireless>Wi‑Fi Protected Setup>Start PIN Method
-
>Network/Ports>Network [x]>Network [x] Setup>Wireless>Wi‑Fi Protected Setup>Start PIN Method
- Copy the eight–digit WPS PIN.
- Open a Web browser, and then type the IP address of your access point in the address field.
- The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
- If you are using a proxy server, then temporarily disable it to load the Web page correctly.
- Access the WPS settings. For more information, see the documentation that came with your access point.
- Enter the eight‑digit PIN, and then save the setting.