Connecting the printer to a wireless network using Wi-Fi Protected Setup (WPS)
  1. guides
  2. en
  3. User's Guide
  4. Set up, install, and configure
  5. Networking
  6. Connecting the printer to a wireless network using Wi-Fi Protected Setup (WPS)

Connecting the printer to a wireless network using Wi-Fi Protected Setup™ (WPS)

Connect your printer securely to a wireless network.
Before you begin, make sure that:
  • The access point (wireless router) is WPS‑certified or WPS‑compatible. For more information, see the documentation that came with your access point.
  • A wireless network adapter is installed in your printer. For more information, see the instructions that came with the adapter.
  • Active Adapter
     is set to
    Auto
    . From the control panel, navigate to
    Settings
    Network/Ports
    Network Overview
    Active Adapter
    .
Using the Push Button method
  1. From the control panel, navigate to
    Settings
    Network/Ports
    Wireless
    Wi-Fi Protected Setup
    Start Push Button Method
    .
  2. Follow the instructions on the display.
Using the personal identification number (PIN) method
  1. From the control panel, navigate to
    Settings
    Network/Ports
    Wireless
    Wi-Fi Protected Setup
    Start PIN Method
    .
  2. Copy the eight‑digit WPS PIN.
  3. Open a web browser, and then type the IP address of your access point in the address field.
    To know the IP address, see the documentation that came with your access point.
  4. Access the WPS settings. For more information, see the documentation that came with your access point.
  5. Enter the eight‑digit PIN, and then save the changes.

This site uses cookies for various purposes including enhancing your experience, analytics, and ads. By continuing to browse this site or by clicking "Accept and close", you agree to our use of cookies. For more information, read our Cookies page.