Cannot open Embedded Web Server
  1. guides
  2. en
  3. User's Guide
  4. Troubleshoot a problem
  5. Network connection problems
  6. Cannot open Embedded Web Server

Cannot open Embedded Web Server

Are you unable to access the Embedded Web Server for your printer? Check the IP address or the network connection to solve the issue.
Try one or more of the following:
  • Make sure that the printer is on.
  • Make sure that the printer and the computer are connected to the same network.
  • Make sure that the printer IP address is correct.
    You can find the IP address at the top of the printer display.
  • Make sure that you installed a supported browser.
    • Microsoft Edge
    • Safari version 6 or later
    • Google Chrome™ version 32 or later
    • Mozilla Firefox version 24 or later
  • Check if the network connection is working.
    If the connection is not working, then contact your administrator.
  • Make sure that the cable connections to the printer and print server are secure. For more information, see the documentation that came with the print server.
  • Check if the web proxy servers are disabled.
    If the servers are disabled, then contact your administrator.
If the problem persists, then contact customer support.

This site uses cookies for various purposes including enhancing your experience, analytics, and ads. By continuing to browse this site or by clicking "Accept and close", you agree to our use of cookies. For more information, read our Cookies page.