How to install the Application List Manager

Overview

This article explains how to install the Application List Manager
software.

Affected Products

Any of the following MFPs can utilize this push-scan method:

Lexmark X20
x
* Series MFPs

X26x Series MFPs

X36x Series MFPs

X54x Series MFPs

*
An x
– denotes any number within a given model series.

Before you begin

You must have a USB-connected printer.

You must have the printer's installation CD
or have downloaded the full System Administrators Driver Package
.

If your printer is connected to a network, then consider the other scan methods listed in this table.

Network Scan Methods:

Network TWAIN

Scan Profile

Scanback Utility

WSD Scanning (X548
only)

And understand these requirements:

Method	What you'll need...	To get you started...
Network TWAIN	1. An installed Network TWAIN scan driver 2. Any TWAIN compatible application	Reinstall the Driver CD and make sure you select Network TWAIN Driver under the Custom Installation path. Download the full System Administrators Driver Package . Download the specific Network/USB TWAIN Package . Consider when performing OCR functions.
Scan Profile	1. The printer's IP address 2. The ability to access the printer's Web Page	Creating a Scan Profile via the Embedded Web Server for an example. Consider when performing quick image-type scans.
Scanback Utility	1. The printers IP address 2. The installation of the Scanback Utility	You can download the Scanback Utility from support.lexmark.com if you do not have the original driver CD equipped with the printer. Consider whether you prefer a client-based application for initiating image-type scans.
WSD	A printer that supports WSD	Setting up a WSD printer for scanning and printing for an example. Consider if you have a new generation MFP that supports this new scan method.

How to install the Application List Manager

Insert your CD or download, extract and run the full system administrator's driver package.

Follow the instructions as they appear on the screen.

When you get the
Select Components:
section of the installation, place a checkmark next to USB Scan Driver
.

Also, verify that a checkmark is next to Enhanced Communications System
. Click here for illustration.

Click Finish
.

You should now see the application available under the Lexmark program group.

Click here for illustration.

Default installation path

C:\Program Files\Lexmark\Monitor\LMabalm.exe

Still Need Help?

If you are unable to find any solutions, please contact
Lexmark Technical Support for additional assistance. NOTE:
When calling in for support, you will need the printer model/machine type
and serial number
(SN
).

Please call from near the printer and computer in case the technician on the phone asks you to perform a task involving one of these devices.

LEGACY ID:HO3815