A

900.43

firmware error with the following possible secondary crash codes:

This issue was first seen on the

X952 Series

of MFPs; however, printers with similar firmware architecture may possibly exhibit this issue.

A possible firmware solution may be available upon request. First, verify your printer's latest firmware level as seen next to the

Base code

; this is found under

Device Information

on your menu settings page.

If the latest version of firmware is installed on your printer, then contact Lexmark Technical Support and reference this article's ID.

If you need additional assistance, please close this window, go to your product's support page and locate

Get In Touch with Lexmark!

for contact information.

NOTE:

When calling for support, you will need to provide your

printer model/machine type

and

serial number

(

SN

). Please be near the products described in this article to expedite the support process and reduce call-back situations.

LEGACY ID:

SO7852