How to print booklets using windows PS3 driver
How to Print Booklets on Lexmark C950/X950/X952/X954 Printers Using Windows PS3 Driver
Overview
This article describes the step-by-step procedure in printing booklets on a Lexmark
C950
printer or X950
, X952
, X954
MFPs using Windows PS3
driver.Booklet printing
Step | Action |
1 | |
2 | |
3 | Once Booklet is selected, select the Paper/Finishing tab. |
4 | Next, select the paper size
of the booklet. |
5 | Then select the Finishing options (the example shows Fold & Center Staple). Click the Apply button, then OK . |
Additional Information
Make sure the application's (e.g.,
MS Word
, Adobe Acrobat
, etc.) Paper Size
is smaller than the actual booklet paper size selected in the print driver. For example, if you want to create a booklet using 11x17 paper that will include eight pages (i.e., two folded duplexed pages), then the page size you select in the application should be letter size or "next step" smaller than 11x17 while the print driver paper size should be 11x17. The driver will automatically create the booklet using the smaller application-defined paper size. Failure to setup the paper size correctly in the application can result in a booklet with missing print or page information split on two different booklet panels.Also, do not create the booklet in an application ahead of time; example: adding a “
Book fold
” in MS Word
. Use only the Lexmark Print driver
to create booklet.Still need help?
Please contact Lexmark Technical Support if you need additional assistance.
NOTE:
When calling for support, you will be asked for your machine/model type
and serial number
(SN
). If you need help locating these, How to Locate the Serial Number, Machine Type, and Configuration ID on a Lexmark C950 or X95x Printer/MFP.Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.
LEGACY ID:
HO3820