The Lexmark X925 Multifunction Printer Produces Only Black or Blue Pages when Used as a Copier

What you will see

When copying using the Flatbed glass or Auto Document Feeder (ADF), the resulting pages may look like any of the following:

Click the Image to Enlarge

Black	Bluish	Greenish

Possible cause

This issue happens when the scanner does not see the markings/calibration points on the flatbed, hence seeing everything on the page as black/blue and not able to capture the image correctly.

Issue Verification

If you are getting any of the sample pages presented above when copying, verify the rest of the symptoms by:

Doing Mono
Copies: Select Color OFF
– The output should be similar with the Black
image above.

Doing Color
Copies: Select Color ON
– The output should be similar with the Bluish
or Greenish
images above.

Print the Menu Settings Page
of the Printer. To do this, navigate through: Menu
> Reports
> Menu Settings Page
.
NOTE:
If the issue happens only when “copying”, the result of printing the Menu Settings Page
should be okay.

Save the sample copied pages and the Menu Settings Page
. Contact Lexmark Technical Support and prepare these documents when the Support Agent asks for them.

Still need help?

Please contact Lexmark Technical Support if you need additional assistance.
NOTE:
When calling for support, you will be asked for your machine/model type
and serial number
(SN
). If you need help locating these

Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.

LEGACY ID: TE420