Lexmark 'Scan to Docuware' Solution v1.2.2 Readme
  1. guides
  2. en
  3. Knowledge base
  4. Setup, installation, and configuration issues
  5. Lexmark 'Scan to Docuware' Solution v1.2.2 Readme

Lexmark 'Scan to Docuware' Solution v1.2.2 Readme

Lexmark 'Scan to Docuware'
Readme
v1.2.2(6/11)
Overview
This Readme file pertains to the current release of the LEXMARK SCAN TO DOCUWARE application for multifunction printers (MFPs).
Lexmark Scan to DocuWare is an embedded solution that can be installed on multifunction printers (MFPs) that support the Lexmark Embedded Solutions Framework (eSF) v2.0 or v3.0. Scan to DocuWare captures an image of a hard copy document and inserts the image with optional indices into the DocuWare document management software.
Requirements
  1. Any single or multifunction printer that supports eSF v2.0, and v3.0 applications.
Supported
eSF v2.0 devices
Firmware level requirement
 (or later)
X46xe Series MFPs
LR.BS.P510
X651de, X652de, X654de, X656de and X658de Supported eSF v2.0 MFPs include:
LR.MN.P
510
X734de, X736de and X738de
LR.FL.P510
X860de, X862de, X862dte, X864de, X864dhe, XS860de, XS862de and XS864de
LP.SP.P510
Supported
eSF v3.0 devices
X548de, X548dte and XS548de
LHS1.VK.P141j
X792, X792e, X792de, x792dte, x792dtfe, x792dtpe, x792dtme, x792dtse, XS796de and XS796dte
LHS1.MR.P135k
X925, X925de and XS925de
LHS1.HK.P136k
X950de, X952de, X952dte, X954de, X954dhe and XS955dhe
LHS1.TQ.P145hea
6500e Scanner-equipped printers
LJR.JR.P169
  1. MFP
     device memory requirements: A minimum of
    256 MB
    RAM
    .
  2. The MFP must have a hard drive installed.
  3. This application requires an electronic license. To obtain a license, go to www.lexmark.com and click the "
    Contact
     Lexmark" link at the bottom of the screen.
Package Contents
The following files and publications are included inScan to DocuWare v1.2.2.
  1. ScanToDocuWare_fw2-1.2.2.fls
     - Scan to DocuWare application for eSF v2.0 MFPs
  2. ScanToDocuware_fw3-1.2.2.fls
     - Scan to DocuWare application for eSF v3.0 MFPs
  3. Utility_Files.zip
     Zip file containing the Scan to DocuWare descriptor file
  4. Administrator_Guide.pdf
     - Administrator's Guide
  5. Readme.txt
    (this file)
  6. OpenSource.zip
     - *Mail4Me client documentation * The OpenSource.zip file references source code used by the Scan to DocuWare solution that Lexmark is required to make available to the public. If a user would like to use this code in a program, please consult the licensing documentation provided with this file.
Limitations and compatibility of this release
  1. The "Test" button on the application configuration Web page is not active.
  2. For eSF v3.0 MFPs, the application cannot be configured using MarkVision Professional (MVP).
Installation details
For further installation and configuration instructions, please see the Lexmark 'Scan to Docuware' SharePoint' Administrator's Guide (AdminGuide.pdf) provided with the application. Adobe Acrobat Reader is required to view this guide.adf
LEGACY ID:
FA817

This site uses cookies for various purposes including enhancing your experience, analytics, and ads. By continuing to browse this site or by clicking "Accept and close", you agree to our use of cookies. For more information, read our Cookies page.