Horizontal lines or streaks check
Horizontal Lines or Streaks Appear on Pages Printed from a Lexmark C950/X95x Printer MFP
Issue description
Horizontal streaks of toner in small intervals. Click here to download a sample image and see if it matches the printer’s output.
Solution
In most cases, a defective
photoconductor
unit causes toner streaks. This is especially true if the streaks are of only one color. To identify which photoconductor unit is defective, go to the printer’s Configuration Menu
and print the Quality Test pages
. To do this:- Power off the printer.
- Press and hold theand2buttons simultaneously.6
- Turn on the printer.
- Release the buttons after ten seconds. The printer should boot up to itsConfiguration Menu.
- SelectPrint Quality Pagesto start printing. Confirm whether the print quality issue you are experiencing can be seen on the printed pages.
- After printing, scroll down and selectExit Config Menu. The printer should restart inNormal mode.
One of the printed test pages should show
four horizontal bars
with colors black
, magenta
, cyan
, and yellow
. See which colors show horizontal marks. Replace the photoconductor
unit corresponding to that marked color. If the streaks appear on all four colors, contact Lexmark Technical Support
for other troubleshooting suggestions.Other suggestions
If replacing the
photoconductor
units does not correct the issue or if you have no replacement supplies in stock, please try the following suggestions:- Test the printer with plain copy paper. If you are not currently doing so, try printing on plain copy paper. If this corrects the issue, make sure you are using print media within your printer's specification.Using media outside of the recommended guidelines may result in unsatisfactory print quality. Please consult the printer’sUser's Guidefor information on recommended print media.
- IncorrectPaper Type Setting– Make sure thePaper Type Settingon the printer and in the driver/software matches the type of paper loaded in the tray.
LEGACY ID:
SO6794