PaperCut Username Is Automatically Populated as the Password
What you will see
When you enter your user name and attempt to authenticate on
PaperCut
, the password is pre-populated
with the user name entered on the previous screen.
NOTE:
You will need to clear
the field before entering your password.Affected products
This issue has been seen on following Lexmark models, but other models not listed here could be affected:
2010 Models |
2012 Models |
C748 C792 C925 C950 X548 X74x X792 X925 X95x | CS510 CX410 CX510 MS61x MS81x MX410 MX51x MX61x MX6500 MX71x MX81x |
NOTE:
An x
denotes any number within a given printer model series.Recommended solution
Update your printer to the corresponding firmware levels below:
Printer Model
| Recommended Firmware Update
| How to Obtain
|
PE release P483 or higher | Please contact Lexmark Technical Support and reference this article ID. Support personnel can assist with the update procedure if necessary. |
NOTE:
See Checking the latest Lexmark printer firmware to view steps to check your printer’s firmware code level.Still need help?
If you need additional assistance, please close this window, go to your product's support page and locate 
Get In Touch with Lexmark!
for contact information.
NOTE:
In order to expedite the support process, please be prepared to provide information regarding your issue, e.g., name and version of solution
, problem description
, and affected printer models
.Additional information may be requested by the support agent.
LEGACY ID:
SO7633