TCP/IP installation of a downloaded Lexmark driver in Windows 10 via add printer wizard

Video: TCP/IP Installation of a Downloaded Lexmark Driver in Windows 10 via Add Printer Wizard

About this video

This video is provided for example purposes only
. It is intended to familiarize users with the
installation of a Universal Print Driver (UPD) PCL XL
downloaded from the Lexmark support website.

If Windows 10 print driver is not
yet available, you can use Windows 8
or 8.1
driver packages for Windows 10 supported devices.

The following sequence of procedures you must perform are summarized in the video linked above.

Right-click on the driver package, select Open
.

Observe extraction of files to temporary folder.

Accept License Agreement.

Select Extract
, this time to a specified folder; i.e., C:\Lexmark\...
.

Click
Start
.

Select
Add a printer using a
TCP/IP address or hostname
.

Select Device type: TCP/IP Device
.

Enter the IP Address
of the device.

Select or highlight the print driver, i.e., Lexmark Universal v2 XL.

Click Next
.

Complete the installation.

Verify successful installation via Control Panel
> Devices and Printers
.

LEGACY ID:HO3974