Solid black pages or horizontal black stripes on pages printed
  1. guides
  2. en
  3. Knowledge base
  4. Print Issues
  5. Print quality issues
  6. Solid black pages or horizontal black stripes on pages printed

Solid black pages or horizontal black stripes on pages printed

Solid Black Pages or Horizontal Black Stripes on Pages Printed from the Lexmark CS310, CS410, CS510, CX310, CX410, and CX510
Overview
All your printed pages exhibit solid black or black horizontal stripes appearing completely over the entire printout. The images below illustrate examples.
Print Defect Sample
Solid Black Print
Horizontal Black Stripes
Click Image to Enlarge
Click Image to Enlarge
This article will help you confirm the problem. Please refer to the directions in the table below to help determine which hardware part is causing the issue.
Troubleshooting
Steps
Actions
1
For a print quality defect of this type, it is always advisable to print the following:
  • Menu Settings Page
    – To check the levels of the consumable supplies (i.e., items such as toner cartridges and imaging kit); supplies that are at or near the end of their functional lives can cause various print quality issues independently of the operation of the printer.
Note:
The
User's Guide
provides detailed instructions for navigating through the printer menus.
2
Using the
Menu Settings page
, check the levels of the consumable supplies. Under
Cartridge Information
, first check whether the
black consumable supply
is low. If so, replace it to see whether this resolves the issue. Many print quality issues are caused simply by a supply item that is at or near the end of its expected functional yield. Resend the print job to the printer. Did the issue return?
Yes:
Continue to
Step 3
.
No:
If the page prints, the printer is functioning correctly.
Note:
Instructions for replacing supplies can also be found in the
User's Guide
.
3
If all of the consumable supply levels are adequate, try using another consumable supply to ensure that the issue is
not
simply caused by a defective supply.
4
If issue persists after performing the steps mentioned above, an issue may exist within the machine's hardware. Please contact
Lexmark Technical Support
for other troubleshooting suggestions.
Contacting Lexmark
Please contact
Lexmark Technical Support
if you need additional assistance.
NOTE:
When calling for support, you will be asked for your
machine/model type
and
serial number
(
SN
). If you need help locating your printer's
model type
and
serial number
, how-to-locate-the-serial-number-tli-config-id-and-.html#how-to-locate-the-serial-number-tli-config-id-and-machine-type-on_HO3870. Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.
LEGACY ID:
SO7198