Network Printer No Longer Responding to Print Requests in Microsoft Windows

Document ID:SO4663

Usergroup :External
   
   
4019 4029 4039 + Family 
4039 Family Lexmark C540 Lexmark C543 Lexmark C544 
Lexmark C750 Lexmark C910 Lexmark CV540 Lexmark CV546 
Lexmark E120 Lexmark E120n Lexmark E220 Lexmark E230 
Lexmark E232 Lexmark E234 Lexmark E238 Lexmark E240n 
Lexmark E250d Lexmark E260 Lexmark E352dn Lexmark E360 
Lexmark E460 Lexmark T520 Lexmark T522 Lexmark T620 
Lexmark T622 Lexmark T630 Lexmark T632 Lexmark T634 
Lexmark T640 Lexmark T642 Lexmark T644 Lexmark T650 
Lexmark T652 Lexmark T654 Lexmark X543 Lexmark X544 
Lexmark X651 Lexmark X652 Lexmark X654 Lexmark X656 
Lexmark X658 Lexmark X850 Optra E310 Optra E312 
Optra L Optra Lx Optra Lxi Optra M410 
Optra M412 Optra N model 240 Optra N model 245 Optra R 
Optra Rt Optra Rx Optra S 1250 Optra S 1255 
Optra S 1620 Optra S 1650 Optra S 1855 Optra S 2420 
Optra S 2450 Optra S 2455 Optra T610 Optra T612 
Optra T614 Optra T616 

Problem

Cannot print; Unable to communicate; No communication; Printer offline; Incorrect default printer; Print queue backlog; Print jobs caught in printer queue

Environment

Optra family; Microsoft Windows Vista; Microsoft Windows XP

Solution

Overview:

When attempting to print, you receive Communication Not Available or Document Failed to Print error messages, or no message at all.

 

Index of Troubleshooting Topics:

The following topics are covered in this article:

 


Where should I begin?

It is important to differentiate between communication failure and print failure.

If... Then...
You have confirmed network communication to the printer See Print Failure Diagnosis topics below.
You have not confirmed network connectivity with the printer Click here for an article that describes network communication topics. 


Print Failure Diagnosis

 

Before you begin: 

  • This article assumes that you have already verified network connectivity by performing a ping test using the printer's TCP/IP address, or that you have successfully accessed the printer's embedded web server.
     
  • It is important to understand that the following topics are not listed in any particular order as there are many reasons for print failure.
     
  • If you are unfamiliar with the topics covered in this article or would like additional assistance, please contact Lexmark Technical Support for additional assistance.

 

Back to Index >>


Topic 1: Printer Port Selection

1. Access the driver "Ports" tab

If you have not done so already, print the Network Settings Page. Please consult the User's Guide if unfamiliar with this procedure.    

Open the Printers or Printer and Faxes folder and locate your printer object.

  1. To do this:

    In Windows XP, click Start > Settings > Printer and Faxes, or Start > Control Panel > Printers and Faxes.
    In Windows Vista, click Start > Control Panel > Hardware and Sound > Printers
  2. Right-click on the printer icon and select Properties from the drop-down menu.
  3. Click on the Ports tab.

 

2. Printer Port Selection 

Because the port binds the printer software driver to the print server, (NIC, INA, network adapter, or wireless network adapter) improper configuration or selection of this port will result in print failure. 

Possible port scenarios include:   

  • Incorrect port selection.
  • The original port is not immediately visible.  
  • The original port has been deleted.
  • The printer has picked up a new DHCP-administered IP address, which renders the existing port useless.
  • The Host name used to create the original port has been changed.
  • Duplicate IP address is causing network traffic collisions.
  • A print queue or queue-based print sharing condition.


 3. Port Decision Table

If... Then... And then...


1. Incorrect port selection. 

The port is set to USB00?, LPT?, File, or other.

  • Place a checkmark next to the correct port.

  • Click Apply.
Click on the General tab, then select Print test page
2. The port is not immediately visible
  • Scroll down the complete list of of available ports.

  • Identify the correct port.

    HINT: The Description and Printer values will help identify the correct port.

  • Place a checkmark next to the port.

  • Click Apply.
Click on the General tab, then select Print test page   
3. The original port has been deleted.  Click here for instructions on how to delete and reconfigure a port. After creating a new port, try printing again. 


4. A newly administered DHCP IP address has been configured on the printer.

This can happen for any of the following reasons:  

  • The printer or MFP network adapter has been reset.
     
  • A network administrator failed to properly configure the DHCP server. 
     
  • A printer or network adapter has been replaced.
     
  • The printer was disconnected from the network and moved to a different segment on the network.
     
  • The printer was turned off for an extended period of time.
Since the printer port is bound to the IP address, any IP address change on the printer can render the selected port invalid.

  1. Identify the IP address under TCP/IP on the network settings page. 
     
  2. Verify Status - Connected on the network settings page.
     
  3. Verify that Enable DHCP shows Active.  
     
  4. Click here for instructions on how to delete and reconfigure a port.
After creating a new port, try printing again.

5. The host name used to create the original port has been changed. 

This can happen for any of the following reasons:  

  • The printer or MFP network adapter has been reset.
     
  • The host name has been changed.
     
  • A printer or network adapter has been replaced.
Because a port can be created using a host name, any change in host name on the printer can render the selected port invalid.

  1. Identify the host name on the network settings page.
     
    HINT: 
    This is the first part of the fully qualified domain name, e.g. station139.dhcp.hello.com
     
  2. Alternatively, access the printer web page and look under Reports > Print Server Setup Page > TCP/IP > Fully Qualified Domain Name.
     
  3. If you click on Configure Port and see a different host name from that found on the network settings page, then you may have the wrong port selected.  
     
  4. Click here for instructions on how to delete and reconfigure a port.  
After creating a new port, try printing again.


6. Duplicate IP address causing network traffic collisions.

NOTE: This occurs typically in larger business or enterprise environments.

This can happen for any of the following reasons:  

  • Before or after port configuration the IP address on the printer is manually configured.

  • Manual IP address configuration on the printer disables DHCP, which can prevent proper IP address assignment.

  • Manual IP address assignment causes the DHCP server to no longer see the printer.

  • After the DHCP IP lease expires, the IP address re-enters a pool of available DHCP IP addresses.

  • Another network device on the network now obtains the same IP address.  

  • Two devices now share the same IP address, which prevents proper printer port communication. 
  1. Identify the IP address under TCP/IP on the network settings page. Alternatively, use the printer web page path: Reports > Print Server Setup Page >  TCP/IP > IP address. 
     
  2. Verify Status - Connected on the network settings page.
     
  3. Turn off the printer.
     
  4. Perform a ping test using the IP address.
     
  5. A duplicate IP address is present if the ping test is successful with the printer turned off.
     
  6. Contact a network administrator to resolve this issue.  
     
  7. If a new non-conflicting IP address is configured on the printer, click here for instructions on how to delete and reconfigure a port.

Other indicators:

  1. The network settings page may indicate that Enable DHCP is turned off.   
     
  2. The network settings page may indicate that Address Source is set to Manual.
     
  3. Intermittent success with print requests
After resolving the duplicate IP address situation or creating a new port, try printing again.

7. Print queue or queue-based print sharing condition.

This can happen for any of the following reasons: 

  • Problems with print and file sharing

  • Host (print server) software firewall rules preventing communication with client workstation

  • Necessary security permissions not assigned to allow queue-based printing

  • A change in the share name, e.g. //computer name/printer name

  • Network communication problem between print server and printer
At the print server or the computer hosting the print share/queue:

  1. Verify that you can print. If not, see all other possibilities above.
     
  2. Right-click on the printer object, and then click on Sharing... 
     
  3. Ensure that Do not share this printer is not selected.
     
  4. Under Share this printer, take note of the printer share name.
     
  5. If you have a software firewall application, make sure you have included the remote client's IP address as a trusted zone or in the firewall's allow list.
     
  6. Verify that share permissions are not preventing communication. Contact the network administrator or Microsoft for additional assistance. 
     
  7. If using XP Professional, ensure that simple file sharing is enabled for Guests. Contact your network administrator or Microsoft for additional assistance. 
     
  8. Make sure the print server or computer hosting the print queue is turned on.
     
  9. See Topics below since this computer performs the actual communication with the printer.

At the remote client or workstation:

  1. Right-click on the printer icon and select Properties from the drop-down menu.
     
  2. Locate the port under the ports tab, e.g. //computer name/printer share name.
     
  3. Does the print server's host computer name appear to be correct?
     
  4. Does the share name that was assigned on the print server appear correct?
     
  5. Contact your network administrator or Microsoft for further assistance.
Try printing again after fully diagnosing all of these possibilities.


Back to Index >>


Topic 2: Default Printer Issue

The wrong printer is set as the default. See the image below for an illustration.

 

What to do

Open the Printers or Printer and Faxes folder and locate the correct printer icon.

  1. To do this: In Windows XP, click Start > Settings > Printer and Faxes (or Start > Control Panel > Printers and Faxes).
    In Windows Vista, click Start > Control Panel > Hardware and Sound > Printers.
     
  2. Right-click on the printer icon, and click Set as Default Printer. A check mark displayed above the printer icon now identifies it as your default printer.

  3. Try printing again.


Back to Index >>


Topic 3: Printer is "Offline"

The printer is set to Offline and the printer icon appears washed-out. See the image below for an illustration.


What to do 

Open the Printers or Printer and Faxes folder and locate the correct printer icon.

To do this:

  1. In Windows XP, click Start > Settings > Printer and Faxes (or Start > Control Panel > Printers and Faxes).
    In Windows Vista, click Start > Control Panel > Hardware and Sound > Printers.
     
  2. Right-click on the printer icon, and select Use Printer Online.
     
  3. Try printing again. 


Back to Index >>


Topic 4 Printer is not Ready

The printer is in an "Intervention Requested" state (e.g. paper jam, paper out) but no Windows print error notification message is displayed.

Explanation

The print job cleared the print queue. This means the print queue icon has disappeared from the notification area ('systray') of the task bar. The printer is holding the job, however, until the the printer is returned to a ready state.

What to do

 

Check the printer LCD, or operator panel menu, to verify that the printer is in a ready state. If not, return it to the required status. 


Back to Index >>


Topic 5: Printer is Paused

The printer or print queue is paused and the print queue icon remains in the notification area ('systray') of the task bar.

Explanation

This is typically an end user error. Dragging the mouse cursor over the print queue icon in the notification area will reveal (1,2,3) document(s) pending for (User name).

What to do

  1. Double-click on the print queue icon to open the print queue. (This may also appear as a small printer icon in the lower-right notification area of the task bar.) 
     
  2. Click on Printer in the upper left-hand corner of the menu bar.
     
  3. Is there a check mark next to Pause Printing?

    • If yes, click on Pause Printing to turn off this Windows feature.
       
    • If no, confirm that there is a check mark next to Set As Default Printer and make sure Use Printer Offline is not selected.

 

Back to Index >>


Topic 6: Windows Print Spooler Issue

A problem with the Windows print spooler is preventing successful printing.

What to try

Stop and start the Windows print spooler.

To do this:

  • In Windows XP, click Start > Control Panel > Administrative Tools > Services, click on Print Spooler, click on Stop the service, and then click on Start the service
  • In Windows Vista, click Start, type services.msc in the Start Search box, and then click services.msc in the Programs list. Right-click on Print Spooler, and then click Stop. Finally, right-click on Print Spooler again, and then click Start.

 

Remove the first print job from the print queue.

 

To do this:

  1. Double-click on the print queue icon to open the print queue. (This may also appear as a small printer icon in the lower-right notification area of the task bar.)
     
  2. Click on the first job listed so that it is highlighted.
     
  3. Click on Document in the top menu bar.
     
  4. Click on Cancel.
     
  5. Click Yes when you see: "Are you sure you want to cancel the selected jobs?" 

Click here for illustration.

 

Back to Index >>


Topic 7: Other Issues

Other possible causes of a print job not printing include:

  • USB connection problem if locally connected only.
     
  • Firewall issues preventing communication.
     
  • Workplace virtual private networks (VPNs) preventing communication. VPN tunneling may be required to ensure successful communication. Enabling this feature may require network administrator approval and assistance. 
     
  • Document formatting.
     
  • Driver settings.
     
  • Application-specific issues relating to the application's Printer Setup. 

 

Back to Index >>


Topic 8: Last Resort

If you have tried all of the above suggestions to no avail, try the following:

  1. Reboot your computer and try printing again.
     
  2. Turn the printer off and on, and then try to print again.
     
  3. Install a different printer driver, e.g. PCL, PostScript, HBP, or XPS driver.
     

 

Back to Index >>


 

Still Need Help?

Have the following available when calling Lexmark Technical Support;

  • Printer model(s)
  • Printer serial number