Thank you for your feedback



Printing Label Paper Gets Stuck in Transfer Module

Document ID:SO8817

Usergroup :External
  Languages  
  Properties  

Solution

Affected Products:

Single-Function: CS331, C3224, C3326

Multifunction: CX331, MC3224, MC3326

 

Issue Description:

When printing using a label paper, there are smudges/smears/voids on the printout. 

There is also a poor transfer on the print area with a size of a label that may have been fed but peeled off, got stuck on the printer transfer unit, and is appearing on the printout.

 

Solution:

  1. Make sure the paper used is a supported media.
     
  2. Use flat and fresh labels when printing (i.e., Label not rolled up, folded, starting to peel off, etc.)
     
    Note: If a label peels away when attempting to feed through the printer's paper path;
    • It can become adhered to the printer's Image Transfer Unit
    • It is difficult to remove without damaging the belt and leaving behind adhesive residue which will degrade print quality.

 

Still Need Help?

Have the following available when calling Lexmark Technical Support;

 



Link:
Please enter the email address you would like to send a copy of this page to.