The Operator Panel Display Is Blank on the Lexmark CS310, CS410, CS510, CX310, CX410, and CX510
|Lexmark CS310||Lexmark CS410||Lexmark CS510|
|Lexmark CX310||Lexmark CX410||Lexmark CX510|
The Operator Panel display does not power on (light up) and goes blank and unresponsive.
Steps Actions 1 The touch screen display may be in 'sleep' mode. Lightly touch the display and see whether the display panel lights up. 2 If the display does not respond, press OK or the Copy button and see whether the printer attempts to lights up the display. 3 If the printer comes to the 'Ready' state after powering it back on, use the operator panel on the printer to print one of the internal pages; i.e., a settings page or a demo page.
Note: If the issue occurs again, proceed with the steps below.
4 If the printer does not respond, power off the printer. Allow the printer to sit powered off for ten to 20 seconds. 5 After ten seconds or more, power the printer on again. See whether the display panel powers on correctly.
Note: Do not power the printer off and on too quickly. Doing so can cause a power issue with the display panel and create this type of issue.
6 Should powering the printer off and on not correct the issue, see if the display is readable at all.
Note: If the Main Fan is not running during power-up sequence and the Green LED is OFF, see No Power Issue.
7 If the display is blank or completely unreadable, this issue requires a service call. Please contact Lexmark Technical Support for other troubleshooting suggestions.
Please contact Lexmark Technical Support if you need additional assistance. NOTE: When calling for support, you will be asked for your machine/model type and serial number (SN). If you need help locating your printer's model type and serial number, click here.
Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.