Thank you for your feedback



How to Replace the Black and Color Imaging Kit on the Lexmark C54x and X54x Printer/MFP

Document ID:SO4602
 
  Properties  

Problem

How to replace the black and color imaging kit; Color imaging kit; Image kit; Color imaging kit replacement steps; How do I replace the imaging kit?; How do I replace the black and color imaging kit?; How to remove the imaging unit; How to remove the imaging kit; Imaging unit removal procedure; Imaging kit removal procedure

Solution

Overview


This article explains how to replace the Black and Color Imaging kit on Lexmark C54x and X54x Color Laser and Multifunction printers.

NOTE: To see a video demonstration, please click here. If unable to play the installation video, please follow the the step-by-step procedure below.

 

 

Replacement Procedures

For Lexmark C540, C543, C544 and C546 Color Laser Printers

Step Action Image
1


Grasp the front door by the side handles and pull it forward.


 CAUTION! The inside of the printer may be hot. To avoid injury, allow the components to cool off before continuing.


Click here to enlarge.
2 Open the top door.
Click here to enlarge.
3 Remove the toner cartridges by lifting the handles and then gently pulling away from the imaging kit.
 

Click here to enlarge.
4 Remove the right-side cover.
Click here to enlarge.
5 Press the green levers on either side of the waste toner bottle, and remove the bottle.
Click here to enlarge.
6 Lift the blue levers on the imaging kit, and pull it towards you.
Click here to enlarge.
7

 

Press down on the blue levers, grasp the green handles on the sides, and then pull the imaging kit out of the printer.

 


Click here to enlarge.

 

8

 

 

Unpack the new Black and Color imaging kit. Leave the packaging on the developer units. 

 

 

No Image

 

 

9

 

 

Gently shake the Black and Color developer units from side to side.

 

 

No Image

 

 

10

 

 

Remove the packaging from the individual developer units.

 


Click here to enlarge.
11

Insert the new Black and Color developer units.

Note: Make sure each developer unit is inserted into its corresponding slot.



Click here to enlarge.
12

Align and insert the imaging kit.

Warning! Do not touch the underside of the imaging kit as this could damage it.

 

Rotate the blue levers down until the imaging kit drops into place.


Click here to enlarge.
13 Replace the waste toner bottle.
Click here to enlarge.
14 Replace the right-side cover.
Click here to enlarge.
15 Replace the toner cartridges.
Click here to enlarge.
16 Close the top cover.
Click here to enlarge.
17 Close the front door.
Click here to enlarge.
18

Place the used Black and Color imaging kit in the packaging materials of the new imaging kit. Return the used supply items to Lexmark for recycling.

 


 

 

For Lexmark X543, X544, X546 and X548 Color Laser MFPs


Step Action Image
1


Grasp the front door at the side handholds, and then pull it toward you to open it.


 CAUTION! The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching.


Click here to enlarge.
2 Open the top door.
Click here to enlarge.
3 Remove the toner cartridges by lifting the handles and then gently pulling away from the imaging kit.
Click here to enlarge.
4 Remove the right-side cover.
Click here to enlarge.
5 Press the green levers on each side of the waste toner bottle, and remove it.
 Click here to enlarge.
6 Lift the blue levers on the imaging kit, and pull it towards you.
Click here to enlarge.
7

 

Press down on the blue levers, grasp the green handles on the sides, and then pull the imaging kit out of the MFP.

 


Click here to enlarge.
8

 

Unpack the new Black and Color imaging kit. Leave the packaging on the developer units. 

 

 

No Image

 

9

 

Gently shake the Black and Color developer units from side to side.

 

 

No Image

 

10

Remove the packaging from the individual developer units.


Click here to enlarge.
11

Insert the new Black and Color developer units.

Note: Make sure each developer unit is inserted into its corresponding slot.



Click here to enlarge.
12

Align and insert the imaging kit.

Warning! Do not touch the underside of the imaging kit as this could damage it.


Click here to enlarge.
13 Rotate the blue levers down until the imaging kit drops into place.
Click here to enlarge.
14 Replace the waste toner bottle.
Click here to enlarge.
15 Replace the right-side cover.
Click here to enlarge.
16 Replace the toner cartridges.
Click here to enlarge.
17 Close the top cover.
Click here to enlarge.
18 Close the front door.
Click here to enlarge.
19

Place the used Black and Color imaging kit in the packaging materials of the new imaging kit. Return the used supply items to Lexmark for recycling.


 

Still need help?


Please contact Lexmark Technical Support if you need additional assistance. NOTE: When calling for support, you will be asked for your machine/model type and serial number (SN). If you need help locating these, please click here, (C54x / X54x).

Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.

 



Link:
Please enter the email address you would like to send a copy of this page to.