Thank you for your feedback



Set Date and Time Settings on the X64xe Embedded Web Server

Document ID:SO4550
 
  Properties  

Environment

How to set date and time

Solution

Overview

This article provides a brief description of all the configurable settings found under Configuration > Set Date and Time.  This option can also be found via Menu > Settings on the MFP user interface.
NOTE: Security permissions set on the device may prevent access to these settings.

Set Date and Time settings

Bold text indicates MFP default settings.
EWS = Embedded Web Server
EWS SettingPurposeConfiguration Selections Available
Time ZoneSets time zone, DST (Daylight Saving Time) offsets and UTC (Coordinated Universal Time) offsets.  See 'Additional Information and Related Articles' below.
Current Date and TimeDisplays current time held by RTC (Real Time Clock) or NTP (Network Time Protocol).End user reference only 
Set Date and TimeManual entry of Year, Month, Day, Hour and Minutes (YYYY-MM-DD-HH:MM).Value specified by end user
DST ModeDetermines whether or not the MFP will attempt to establish correct time during time changes.Automatic or Manual
Daylight SavingsDetermines whether or not the device will attempt to establish proper time change during DST periods.  
Yes or No
NOTE:  Changing this value to No requires that DST mode be set to Manual.
Time ServerIf NTP (Network Time Protocol)  is utilized on the network, this setting may be set to IP.  This may be needed or desired for consistent synchronization of time and date. None or IP.
Time Server NameName or IP address of the time server. Host name or IP address of the NTP server.
Allow NTP BroadcastAllows the MFP to broadcast SNMP beacons in an attempt to locate the NTP server. Off or On.

Illustration


Click here for an enlarged image.

 Additional Information and Related Articles

-Click here for an overview of the same configuration settings in the MFP Menus Guide.
-Click here for an article regarding the 2007 DST changes in the U.S.
-Click here for an article regarding the 2007 DST changes for Lexmark Solutions and Support Tools.
-Click here for an article which references DST options and accessibility via MarkVision Professional 11.  

Contacting Lexmark

If you need additional assistance, please contact Lexmark Technical SupportNOTE: When calling for support you will need your printer machine/model type and serial number.
Please call from near the computer and printer in case the technician requires you to perform a task on one of these devices. 
 


Link:
Please enter the email address you would like to send a copy of this page to.