Thank you for your feedback



Instructions for Installing and Removing the Image Transfer Belt on the Lexmark C780 or C782 Color Laser Printer

Document ID:SO3922
 
  Properties  

Environment

ITU installation; Transfer belt installation; ITU removal; Transfer belt removal; Supply removal; Supply installation

Solution

Overview

Follow these steps to remove the image transfer unit (ITU) safely from the printer and then reinstall it.
WARNING! DO NOT TOUCH THE TRANSFER BELT! TOUCHING THE TRANSFER BELT WILL DAMAGE THE ITU.

Removal instructions

 
StepActionImage
1Power the printer off and remove all four print cartridges from the machine.
2Release the latches and open the Multipurpose Feeder (area A) all the way.
3Raise the lever to unlock the Image Transfer Unit.
4Pull down the handle.
5
Slide the Image Transfer Unit out and place it on a clean, flat surface.
WARNING! Do not touch the transfer belt. Touching the transfer belt will damage the Image Transfer Unit.

Installation instructions

  WARNING!  DO NOT TOUCH THE TRANSFER BELT!  TOUCHING THE TRANSFER BELT WILL DAMAGE THE ITU!

StepActionImage
1Make sure all the print cartridges are removed from the printer and that the multipurpose feeder is open all the way.
2Insert the ITU into the back of the printer.  Align the guides with the intersection grooves, and slide the unit in.
3Rotate the handle up, and push gently to lock the unit into place.
4Lower the lever to lock the ITU  into place.

Still need help?

Please contact Lexmark Technical Support if you need additional assistance.  NOTE: When calling for service you will need to know your printer model type and serial number.  If you need help locating your printer's model type and serial number, click here.
Please call from near the printer in case the technician asks you to perform a task involving the printer.


Link:
Please enter the email address you would like to send a copy of this page to.