Microsoft Windows 10 contains many In-box or In-OS Lexmark printer drivers that are automatically installed using Plug and Play (PnP). To determine the best-fit or most recently updated driver, the operating system searches a local driver store and performs a Windows Update (WU) before finalizing printer driver installation.
NOTE: This multiple-step process may cause a slight delay in the creation of a printer object.
Plug and Play Requirements
- A network connection with no more than 30 devices.
- The network cannot be part of domain.
- Your machine cannot be connected to a VPN.
- Administrator privileges or rights are required.
|Action or Scenario||For help...|
|FIRST! Determine whether your device supports Windows 10.||
Click here to access the recommended driver list.
Note: Windows 10 drivers may not be immediately available. In the meantime, you may use Windows 8 or 8.1 driver packages for Windows 10 supported printers.
Important! Windows 10 Mobile is currently not supported by Lexmark printers, click here for additional information on product details and limitation for each printer.
|First-time installation of network or USB-connected printer.
Note: The in-OS driver is required to support Windows 10.
|See Automatic Windows 10 Installation below.|
|The operating system does not detect the printer when attached via USB or network cable.||
See Add Printer: Manual Install – Run Windows Update below.
This installation path is the most common since Windows 10 will include many current Lexmark printer drivers. Moreover, drivers not currently available in the operating system's driver store will be made available via Windows Update.
- Verify if the Windows 10 printer driver is supported.
- If installing a network printer, make sure that your printer is already communicating on the network.
- Obtain the printer's IP address or hostname. This information is easily obtained by printing a network settings page.
- Windows Update requires an active Internet connection, so:
- Make sure your Firewall software allows for exceptions or exclusions for the Windows Update service.
- Make sure the Windows Update service is running; e.g., type services.msc.
NOTE: Contact Microsoft or your system administrator if you are unable to activate the Windows Update service.
Class Drivers – V4 drivers that ship with Windows 10 are known as Class Drivers. Drivers of this type should always display Class Driver in the name.
Model Specific Drivers – V4 drivers that are downloaded directly from a printer manufacturer website or downloaded from Windows Update are known as model specific drivers.
|1||Verify your USB connection and network connectivity, and then wait while Windows 10 detects your printer hardware.|
As new drivers become available, Windows Updates will ensure that you are using the latest known driver.
If your printer is on a network, you will want to obtain your printer's IP address; this will ensure a clean new driver installation. You can delete the existing printer object after the newest driver has been installed.
Access Devices and Printers. To do so, perform either of the following:
Click Add a Printer.
When the system starts searching for available printers, click The printer that I want isn't listed.
Select Add a local printer or network printer with manual settings, and then click Next.
From the Type of Port list, select Standard TCP/IP port.
Enter the appropriate information in the following required dialog entry fields:
Note: The port name can be changed at the end user's discretion.
Click Next. Windows will query the printer to confirm successful communication.
Click on Windows Update.
You will see the message "Windows is updating the list of printers. This might take a few minutes."
Note: This procedure may take up to an hour to complete.
Once complete, select Lexmark from the Manufacturers list and select your Printer driver from the Printers list.
Possible driver types that may become available:
Which version of the driver do you want to use? is displayed if you are updating or replacing an existing driver (type).
Type a printer name is displayed. Change the printer name if preferred.
Note: When you replace the current driver, you will see a (Copy1, 2, 3...) after the printer name.
Select Set as the default printer, and then click Print a test page, or skip both options and simply click Finish to finalize your printer driver update or installation.
Still Need Help?
If you need additional assistance, please close this window, go to your product's support page and locate Get In Touch with Lexmark! for contact information. NOTE: When calling for support, you will need your printer model/machine type and serial number (SN).
Please be near the products described in this article to expedite the support process and reduce call-back situations.